chenguang/STM32
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects 1 Releases Wiki Activity

Upload files to "3-5 GPIO_光敏传感器/Library"

Browse Source
This commit is contained in:
chenguang
2026-02-21 20:05:18 -05:00
parent dbff0aa2b7
commit 2be6154c11
5 changed files with 4359 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1684
3-5 GPIO_光敏传感器/Library/stm32f10x_flash.c Normal file
View File

File diff suppressed because it is too large Load Diff

426
3-5 GPIO_光敏传感器/Library/stm32f10x_flash.h Normal file
View File

@@ -0,0 +1,426 @@
/**
******************************************************************************
* @file stm32f10x_flash.h
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the FLASH
* firmware library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_FLASH_H
#define __STM32F10x_FLASH_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @addtogroup FLASH
* @{
*/
/** @defgroup FLASH_Exported_Types
* @{
*/
/**
* @brief FLASH Status
*/
typedef enum
{
FLASH_BUSY = 1,
FLASH_ERROR_PG,
FLASH_ERROR_WRP,
FLASH_COMPLETE,
FLASH_TIMEOUT
}FLASH_Status;
/**
* @}
*/
/** @defgroup FLASH_Exported_Constants
* @{
*/
/** @defgroup Flash_Latency
* @{
*/
#define FLASH_Latency_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */
#define FLASH_Latency_1 ((uint32_t)0x00000001) /*!< FLASH One Latency cycle */
#define FLASH_Latency_2 ((uint32_t)0x00000002) /*!< FLASH Two Latency cycles */
#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \
((LATENCY) == FLASH_Latency_1) || \
((LATENCY) == FLASH_Latency_2))
/**
* @}
*/
/** @defgroup Half_Cycle_Enable_Disable
* @{
*/
#define FLASH_HalfCycleAccess_Enable ((uint32_t)0x00000008) /*!< FLASH Half Cycle Enable */
#define FLASH_HalfCycleAccess_Disable ((uint32_t)0x00000000) /*!< FLASH Half Cycle Disable */
#define IS_FLASH_HALFCYCLEACCESS_STATE(STATE) (((STATE) == FLASH_HalfCycleAccess_Enable) || \
((STATE) == FLASH_HalfCycleAccess_Disable))
/**
* @}
*/
/** @defgroup Prefetch_Buffer_Enable_Disable
* @{
*/
#define FLASH_PrefetchBuffer_Enable ((uint32_t)0x00000010) /*!< FLASH Prefetch Buffer Enable */
#define FLASH_PrefetchBuffer_Disable ((uint32_t)0x00000000) /*!< FLASH Prefetch Buffer Disable */
#define IS_FLASH_PREFETCHBUFFER_STATE(STATE) (((STATE) == FLASH_PrefetchBuffer_Enable) || \
((STATE) == FLASH_PrefetchBuffer_Disable))
/**
* @}
*/
/** @defgroup Option_Bytes_Write_Protection
* @{
*/
/* Values to be used with STM32 Low and Medium density devices */
#define FLASH_WRProt_Pages0to3 ((uint32_t)0x00000001) /*!< STM32 Low and Medium density devices: Write protection of page 0 to 3 */
#define FLASH_WRProt_Pages4to7 ((uint32_t)0x00000002) /*!< STM32 Low and Medium density devices: Write protection of page 4 to 7 */
#define FLASH_WRProt_Pages8to11 ((uint32_t)0x00000004) /*!< STM32 Low and Medium density devices: Write protection of page 8 to 11 */
#define FLASH_WRProt_Pages12to15 ((uint32_t)0x00000008) /*!< STM32 Low and Medium density devices: Write protection of page 12 to 15 */
#define FLASH_WRProt_Pages16to19 ((uint32_t)0x00000010) /*!< STM32 Low and Medium density devices: Write protection of page 16 to 19 */
#define FLASH_WRProt_Pages20to23 ((uint32_t)0x00000020) /*!< STM32 Low and Medium density devices: Write protection of page 20 to 23 */
#define FLASH_WRProt_Pages24to27 ((uint32_t)0x00000040) /*!< STM32 Low and Medium density devices: Write protection of page 24 to 27 */
#define FLASH_WRProt_Pages28to31 ((uint32_t)0x00000080) /*!< STM32 Low and Medium density devices: Write protection of page 28 to 31 */
/* Values to be used with STM32 Medium-density devices */
#define FLASH_WRProt_Pages32to35 ((uint32_t)0x00000100) /*!< STM32 Medium-density devices: Write protection of page 32 to 35 */
#define FLASH_WRProt_Pages36to39 ((uint32_t)0x00000200) /*!< STM32 Medium-density devices: Write protection of page 36 to 39 */
#define FLASH_WRProt_Pages40to43 ((uint32_t)0x00000400) /*!< STM32 Medium-density devices: Write protection of page 40 to 43 */
#define FLASH_WRProt_Pages44to47 ((uint32_t)0x00000800) /*!< STM32 Medium-density devices: Write protection of page 44 to 47 */
#define FLASH_WRProt_Pages48to51 ((uint32_t)0x00001000) /*!< STM32 Medium-density devices: Write protection of page 48 to 51 */
#define FLASH_WRProt_Pages52to55 ((uint32_t)0x00002000) /*!< STM32 Medium-density devices: Write protection of page 52 to 55 */
#define FLASH_WRProt_Pages56to59 ((uint32_t)0x00004000) /*!< STM32 Medium-density devices: Write protection of page 56 to 59 */
#define FLASH_WRProt_Pages60to63 ((uint32_t)0x00008000) /*!< STM32 Medium-density devices: Write protection of page 60 to 63 */
#define FLASH_WRProt_Pages64to67 ((uint32_t)0x00010000) /*!< STM32 Medium-density devices: Write protection of page 64 to 67 */
#define FLASH_WRProt_Pages68to71 ((uint32_t)0x00020000) /*!< STM32 Medium-density devices: Write protection of page 68 to 71 */
#define FLASH_WRProt_Pages72to75 ((uint32_t)0x00040000) /*!< STM32 Medium-density devices: Write protection of page 72 to 75 */
#define FLASH_WRProt_Pages76to79 ((uint32_t)0x00080000) /*!< STM32 Medium-density devices: Write protection of page 76 to 79 */
#define FLASH_WRProt_Pages80to83 ((uint32_t)0x00100000) /*!< STM32 Medium-density devices: Write protection of page 80 to 83 */
#define FLASH_WRProt_Pages84to87 ((uint32_t)0x00200000) /*!< STM32 Medium-density devices: Write protection of page 84 to 87 */
#define FLASH_WRProt_Pages88to91 ((uint32_t)0x00400000) /*!< STM32 Medium-density devices: Write protection of page 88 to 91 */
#define FLASH_WRProt_Pages92to95 ((uint32_t)0x00800000) /*!< STM32 Medium-density devices: Write protection of page 92 to 95 */
#define FLASH_WRProt_Pages96to99 ((uint32_t)0x01000000) /*!< STM32 Medium-density devices: Write protection of page 96 to 99 */
#define FLASH_WRProt_Pages100to103 ((uint32_t)0x02000000) /*!< STM32 Medium-density devices: Write protection of page 100 to 103 */
#define FLASH_WRProt_Pages104to107 ((uint32_t)0x04000000) /*!< STM32 Medium-density devices: Write protection of page 104 to 107 */
#define FLASH_WRProt_Pages108to111 ((uint32_t)0x08000000) /*!< STM32 Medium-density devices: Write protection of page 108 to 111 */
#define FLASH_WRProt_Pages112to115 ((uint32_t)0x10000000) /*!< STM32 Medium-density devices: Write protection of page 112 to 115 */
#define FLASH_WRProt_Pages116to119 ((uint32_t)0x20000000) /*!< STM32 Medium-density devices: Write protection of page 115 to 119 */
#define FLASH_WRProt_Pages120to123 ((uint32_t)0x40000000) /*!< STM32 Medium-density devices: Write protection of page 120 to 123 */
#define FLASH_WRProt_Pages124to127 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 124 to 127 */
/* Values to be used with STM32 High-density and STM32F10X Connectivity line devices */
#define FLASH_WRProt_Pages0to1 ((uint32_t)0x00000001) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 0 to 1 */
#define FLASH_WRProt_Pages2to3 ((uint32_t)0x00000002) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 2 to 3 */
#define FLASH_WRProt_Pages4to5 ((uint32_t)0x00000004) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 4 to 5 */
#define FLASH_WRProt_Pages6to7 ((uint32_t)0x00000008) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 6 to 7 */
#define FLASH_WRProt_Pages8to9 ((uint32_t)0x00000010) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 8 to 9 */
#define FLASH_WRProt_Pages10to11 ((uint32_t)0x00000020) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 10 to 11 */
#define FLASH_WRProt_Pages12to13 ((uint32_t)0x00000040) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 12 to 13 */
#define FLASH_WRProt_Pages14to15 ((uint32_t)0x00000080) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 14 to 15 */
#define FLASH_WRProt_Pages16to17 ((uint32_t)0x00000100) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 16 to 17 */
#define FLASH_WRProt_Pages18to19 ((uint32_t)0x00000200) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 18 to 19 */
#define FLASH_WRProt_Pages20to21 ((uint32_t)0x00000400) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 20 to 21 */
#define FLASH_WRProt_Pages22to23 ((uint32_t)0x00000800) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 22 to 23 */
#define FLASH_WRProt_Pages24to25 ((uint32_t)0x00001000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 24 to 25 */
#define FLASH_WRProt_Pages26to27 ((uint32_t)0x00002000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 26 to 27 */
#define FLASH_WRProt_Pages28to29 ((uint32_t)0x00004000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 28 to 29 */
#define FLASH_WRProt_Pages30to31 ((uint32_t)0x00008000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 30 to 31 */
#define FLASH_WRProt_Pages32to33 ((uint32_t)0x00010000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 32 to 33 */
#define FLASH_WRProt_Pages34to35 ((uint32_t)0x00020000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 34 to 35 */
#define FLASH_WRProt_Pages36to37 ((uint32_t)0x00040000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 36 to 37 */
#define FLASH_WRProt_Pages38to39 ((uint32_t)0x00080000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 38 to 39 */
#define FLASH_WRProt_Pages40to41 ((uint32_t)0x00100000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 40 to 41 */
#define FLASH_WRProt_Pages42to43 ((uint32_t)0x00200000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 42 to 43 */
#define FLASH_WRProt_Pages44to45 ((uint32_t)0x00400000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 44 to 45 */
#define FLASH_WRProt_Pages46to47 ((uint32_t)0x00800000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 46 to 47 */
#define FLASH_WRProt_Pages48to49 ((uint32_t)0x01000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 48 to 49 */
#define FLASH_WRProt_Pages50to51 ((uint32_t)0x02000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 50 to 51 */
#define FLASH_WRProt_Pages52to53 ((uint32_t)0x04000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 52 to 53 */
#define FLASH_WRProt_Pages54to55 ((uint32_t)0x08000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 54 to 55 */
#define FLASH_WRProt_Pages56to57 ((uint32_t)0x10000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 56 to 57 */
#define FLASH_WRProt_Pages58to59 ((uint32_t)0x20000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 58 to 59 */
#define FLASH_WRProt_Pages60to61 ((uint32_t)0x40000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
Write protection of page 60 to 61 */
#define FLASH_WRProt_Pages62to127 ((uint32_t)0x80000000) /*!< STM32 Connectivity line devices: Write protection of page 62 to 127 */
#define FLASH_WRProt_Pages62to255 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 62 to 255 */
#define FLASH_WRProt_Pages62to511 ((uint32_t)0x80000000) /*!< STM32 XL-density devices: Write protection of page 62 to 511 */
#define FLASH_WRProt_AllPages ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Pages */
#define IS_FLASH_WRPROT_PAGE(PAGE) (((PAGE) != 0x00000000))
#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF))
#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806))
/**
* @}
*/
/** @defgroup Option_Bytes_IWatchdog
* @{
*/
#define OB_IWDG_SW ((uint16_t)0x0001) /*!< Software IWDG selected */
#define OB_IWDG_HW ((uint16_t)0x0000) /*!< Hardware IWDG selected */
#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
/**
* @}
*/
/** @defgroup Option_Bytes_nRST_STOP
* @{
*/
#define OB_STOP_NoRST ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */
#define OB_STOP_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */
#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST))
/**
* @}
*/
/** @defgroup Option_Bytes_nRST_STDBY
* @{
*/
#define OB_STDBY_NoRST ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */
#define OB_STDBY_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */
#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST))
#ifdef STM32F10X_XL
/**
* @}
*/
/** @defgroup FLASH_Boot
* @{
*/
#define FLASH_BOOT_Bank1 ((uint16_t)0x0000) /*!< At startup, if boot pins are set in boot from user Flash position
and this parameter is selected the device will boot from Bank1(Default) */
#define FLASH_BOOT_Bank2 ((uint16_t)0x0001) /*!< At startup, if boot pins are set in boot from user Flash position
and this parameter is selected the device will boot from Bank 2 or Bank 1,
depending on the activation of the bank */
#define IS_FLASH_BOOT(BOOT) (((BOOT) == FLASH_BOOT_Bank1) || ((BOOT) == FLASH_BOOT_Bank2))
#endif
/**
* @}
*/
/** @defgroup FLASH_Interrupts
* @{
*/
#ifdef STM32F10X_XL
#define FLASH_IT_BANK2_ERROR ((uint32_t)0x80000400) /*!< FPEC BANK2 error interrupt source */
#define FLASH_IT_BANK2_EOP ((uint32_t)0x80001000) /*!< End of FLASH BANK2 Operation Interrupt source */
#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */
#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */
#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC BANK1 error interrupt source */
#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH BANK1 Operation Interrupt source */
#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0x7FFFEBFF) == 0x00000000) && (((IT) != 0x00000000)))
#else
#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC error interrupt source */
#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH Operation Interrupt source */
#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */
#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */
#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000)))
#endif
/**
* @}
*/
/** @defgroup FLASH_Flags
* @{
*/
#ifdef STM32F10X_XL
#define FLASH_FLAG_BANK2_BSY ((uint32_t)0x80000001) /*!< FLASH BANK2 Busy flag */
#define FLASH_FLAG_BANK2_EOP ((uint32_t)0x80000020) /*!< FLASH BANK2 End of Operation flag */
#define FLASH_FLAG_BANK2_PGERR ((uint32_t)0x80000004) /*!< FLASH BANK2 Program error flag */
#define FLASH_FLAG_BANK2_WRPRTERR ((uint32_t)0x80000010) /*!< FLASH BANK2 Write protected error flag */
#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/
#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */
#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */
#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */
#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */
#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */
#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */
#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */
#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */
#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0x7FFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000))
#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \
((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \
((FLAG) == FLASH_FLAG_OPTERR)|| \
((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \
((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \
((FLAG) == FLASH_FLAG_BANK2_BSY) || ((FLAG) == FLASH_FLAG_BANK2_EOP) || \
((FLAG) == FLASH_FLAG_BANK2_PGERR) || ((FLAG) == FLASH_FLAG_BANK2_WRPRTERR))
#else
#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */
#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */
#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */
#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */
#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */
#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/
#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */
#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */
#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */
#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000))
#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \
((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \
((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \
((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \
((FLAG) == FLASH_FLAG_OPTERR))
#endif
/**
* @}
*/
/**
* @}
*/
/** @defgroup FLASH_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup FLASH_Exported_Functions
* @{
*/
/*------------ Functions used for all STM32F10x devices -----*/
void FLASH_SetLatency(uint32_t FLASH_Latency);
void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess);
void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer);
void FLASH_Unlock(void);
void FLASH_Lock(void);
FLASH_Status FLASH_ErasePage(uint32_t Page_Address);
FLASH_Status FLASH_EraseAllPages(void);
FLASH_Status FLASH_EraseOptionBytes(void);
FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data);
FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data);
FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data);
FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages);
FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState);
FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY);
uint32_t FLASH_GetUserOptionByte(void);
uint32_t FLASH_GetWriteProtectionOptionByte(void);
FlagStatus FLASH_GetReadOutProtectionStatus(void);
FlagStatus FLASH_GetPrefetchBufferStatus(void);
void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState);
FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG);
void FLASH_ClearFlag(uint32_t FLASH_FLAG);
FLASH_Status FLASH_GetStatus(void);
FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout);
/*------------ New function used for all STM32F10x devices -----*/
void FLASH_UnlockBank1(void);
void FLASH_LockBank1(void);
FLASH_Status FLASH_EraseAllBank1Pages(void);
FLASH_Status FLASH_GetBank1Status(void);
FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout);
#ifdef STM32F10X_XL
/*---- New Functions used only with STM32F10x_XL density devices -----*/
void FLASH_UnlockBank2(void);
void FLASH_LockBank2(void);
FLASH_Status FLASH_EraseAllBank2Pages(void);
FLASH_Status FLASH_GetBank2Status(void);
FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout);
FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT);
#endif
#ifdef __cplusplus
}
#endif
#endif /* __STM32F10x_FLASH_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

866
3-5 GPIO_光敏传感器/Library/stm32f10x_fsmc.c Normal file
View File

@@ -0,0 +1,866 @@
/**
******************************************************************************
* @file stm32f10x_fsmc.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the FSMC firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_fsmc.h"
#include "stm32f10x_rcc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup FSMC
* @brief FSMC driver modules
* @{
*/
/** @defgroup FSMC_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup FSMC_Private_Defines
* @{
*/
/* --------------------- FSMC registers bit mask ---------------------------- */
/* FSMC BCRx Mask */
#define BCR_MBKEN_Set ((uint32_t)0x00000001)
#define BCR_MBKEN_Reset ((uint32_t)0x000FFFFE)
#define BCR_FACCEN_Set ((uint32_t)0x00000040)
/* FSMC PCRx Mask */
#define PCR_PBKEN_Set ((uint32_t)0x00000004)
#define PCR_PBKEN_Reset ((uint32_t)0x000FFFFB)
#define PCR_ECCEN_Set ((uint32_t)0x00000040)
#define PCR_ECCEN_Reset ((uint32_t)0x000FFFBF)
#define PCR_MemoryType_NAND ((uint32_t)0x00000008)
/**
* @}
*/
/** @defgroup FSMC_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup FSMC_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup FSMC_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup FSMC_Private_Functions
* @{
*/
/**
* @brief Deinitializes the FSMC NOR/SRAM Banks registers to their default
* reset values.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1
* @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2
* @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3
* @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4
* @retval None
*/
void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank)
{
/* Check the parameter */
assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank));
/* FSMC_Bank1_NORSRAM1 */
if(FSMC_Bank == FSMC_Bank1_NORSRAM1)
{
FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030DB;
}
/* FSMC_Bank1_NORSRAM2, FSMC_Bank1_NORSRAM3 or FSMC_Bank1_NORSRAM4 */
else
{
FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030D2;
}
FSMC_Bank1->BTCR[FSMC_Bank + 1] = 0x0FFFFFFF;
FSMC_Bank1E->BWTR[FSMC_Bank] = 0x0FFFFFFF;
}
/**
* @brief Deinitializes the FSMC NAND Banks registers to their default reset values.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
* @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
* @retval None
*/
void FSMC_NANDDeInit(uint32_t FSMC_Bank)
{
/* Check the parameter */
assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
if(FSMC_Bank == FSMC_Bank2_NAND)
{
/* Set the FSMC_Bank2 registers to their reset values */
FSMC_Bank2->PCR2 = 0x00000018;
FSMC_Bank2->SR2 = 0x00000040;
FSMC_Bank2->PMEM2 = 0xFCFCFCFC;
FSMC_Bank2->PATT2 = 0xFCFCFCFC;
}
/* FSMC_Bank3_NAND */
else
{
/* Set the FSMC_Bank3 registers to their reset values */
FSMC_Bank3->PCR3 = 0x00000018;
FSMC_Bank3->SR3 = 0x00000040;
FSMC_Bank3->PMEM3 = 0xFCFCFCFC;
FSMC_Bank3->PATT3 = 0xFCFCFCFC;
}
}
/**
* @brief Deinitializes the FSMC PCCARD Bank registers to their default reset values.
* @param None
* @retval None
*/
void FSMC_PCCARDDeInit(void)
{
/* Set the FSMC_Bank4 registers to their reset values */
FSMC_Bank4->PCR4 = 0x00000018;
FSMC_Bank4->SR4 = 0x00000000;
FSMC_Bank4->PMEM4 = 0xFCFCFCFC;
FSMC_Bank4->PATT4 = 0xFCFCFCFC;
FSMC_Bank4->PIO4 = 0xFCFCFCFC;
}
/**
* @brief Initializes the FSMC NOR/SRAM Banks according to the specified
* parameters in the FSMC_NORSRAMInitStruct.
* @param FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef
* structure that contains the configuration information for
* the FSMC NOR/SRAM specified Banks.
* @retval None
*/
void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
{
/* Check the parameters */
assert_param(IS_FSMC_NORSRAM_BANK(FSMC_NORSRAMInitStruct->FSMC_Bank));
assert_param(IS_FSMC_MUX(FSMC_NORSRAMInitStruct->FSMC_DataAddressMux));
assert_param(IS_FSMC_MEMORY(FSMC_NORSRAMInitStruct->FSMC_MemoryType));
assert_param(IS_FSMC_MEMORY_WIDTH(FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth));
assert_param(IS_FSMC_BURSTMODE(FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode));
assert_param(IS_FSMC_ASYNWAIT(FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait));
assert_param(IS_FSMC_WAIT_POLARITY(FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity));
assert_param(IS_FSMC_WRAP_MODE(FSMC_NORSRAMInitStruct->FSMC_WrapMode));
assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive));
assert_param(IS_FSMC_WRITE_OPERATION(FSMC_NORSRAMInitStruct->FSMC_WriteOperation));
assert_param(IS_FSMC_WAITE_SIGNAL(FSMC_NORSRAMInitStruct->FSMC_WaitSignal));
assert_param(IS_FSMC_EXTENDED_MODE(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode));
assert_param(IS_FSMC_WRITE_BURST(FSMC_NORSRAMInitStruct->FSMC_WriteBurst));
assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime));
assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime));
assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime));
assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration));
assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision));
assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency));
assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode));
/* Bank1 NOR/SRAM control register configuration */
FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] =
(uint32_t)FSMC_NORSRAMInitStruct->FSMC_DataAddressMux |
FSMC_NORSRAMInitStruct->FSMC_MemoryType |
FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth |
FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode |
FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait |
FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity |
FSMC_NORSRAMInitStruct->FSMC_WrapMode |
FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive |
FSMC_NORSRAMInitStruct->FSMC_WriteOperation |
FSMC_NORSRAMInitStruct->FSMC_WaitSignal |
FSMC_NORSRAMInitStruct->FSMC_ExtendedMode |
FSMC_NORSRAMInitStruct->FSMC_WriteBurst;
if(FSMC_NORSRAMInitStruct->FSMC_MemoryType == FSMC_MemoryType_NOR)
{
FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] |= (uint32_t)BCR_FACCEN_Set;
}
/* Bank1 NOR/SRAM timing register configuration */
FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank+1] =
(uint32_t)FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime |
(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime << 4) |
(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime << 8) |
(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration << 16) |
(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision << 20) |
(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency << 24) |
FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode;
/* Bank1 NOR/SRAM timing register for write configuration, if extended mode is used */
if(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode == FSMC_ExtendedMode_Enable)
{
assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime));
assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime));
assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime));
assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision));
assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency));
assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode));
FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] =
(uint32_t)FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime |
(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime << 4 )|
(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime << 8) |
(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision << 20) |
(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency << 24) |
FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode;
}
else
{
FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 0x0FFFFFFF;
}
}
/**
* @brief Initializes the FSMC NAND Banks according to the specified
* parameters in the FSMC_NANDInitStruct.
* @param FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef
* structure that contains the configuration information for the FSMC
* NAND specified Banks.
* @retval None
*/
void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
{
uint32_t tmppcr = 0x00000000, tmppmem = 0x00000000, tmppatt = 0x00000000;
/* Check the parameters */
assert_param( IS_FSMC_NAND_BANK(FSMC_NANDInitStruct->FSMC_Bank));
assert_param( IS_FSMC_WAIT_FEATURE(FSMC_NANDInitStruct->FSMC_Waitfeature));
assert_param( IS_FSMC_MEMORY_WIDTH(FSMC_NANDInitStruct->FSMC_MemoryDataWidth));
assert_param( IS_FSMC_ECC_STATE(FSMC_NANDInitStruct->FSMC_ECC));
assert_param( IS_FSMC_ECCPAGE_SIZE(FSMC_NANDInitStruct->FSMC_ECCPageSize));
assert_param( IS_FSMC_TCLR_TIME(FSMC_NANDInitStruct->FSMC_TCLRSetupTime));
assert_param( IS_FSMC_TAR_TIME(FSMC_NANDInitStruct->FSMC_TARSetupTime));
assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime));
assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime));
assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime));
assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime));
assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime));
assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime));
assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime));
assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime));
/* Set the tmppcr value according to FSMC_NANDInitStruct parameters */
tmppcr = (uint32_t)FSMC_NANDInitStruct->FSMC_Waitfeature |
PCR_MemoryType_NAND |
FSMC_NANDInitStruct->FSMC_MemoryDataWidth |
FSMC_NANDInitStruct->FSMC_ECC |
FSMC_NANDInitStruct->FSMC_ECCPageSize |
(FSMC_NANDInitStruct->FSMC_TCLRSetupTime << 9 )|
(FSMC_NANDInitStruct->FSMC_TARSetupTime << 13);
/* Set tmppmem value according to FSMC_CommonSpaceTimingStructure parameters */
tmppmem = (uint32_t)FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime |
(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24);
/* Set tmppatt value according to FSMC_AttributeSpaceTimingStructure parameters */
tmppatt = (uint32_t)FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime |
(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24);
if(FSMC_NANDInitStruct->FSMC_Bank == FSMC_Bank2_NAND)
{
/* FSMC_Bank2_NAND registers configuration */
FSMC_Bank2->PCR2 = tmppcr;
FSMC_Bank2->PMEM2 = tmppmem;
FSMC_Bank2->PATT2 = tmppatt;
}
else
{
/* FSMC_Bank3_NAND registers configuration */
FSMC_Bank3->PCR3 = tmppcr;
FSMC_Bank3->PMEM3 = tmppmem;
FSMC_Bank3->PATT3 = tmppatt;
}
}
/**
* @brief Initializes the FSMC PCCARD Bank according to the specified
* parameters in the FSMC_PCCARDInitStruct.
* @param FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef
* structure that contains the configuration information for the FSMC
* PCCARD Bank.
* @retval None
*/
void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
{
/* Check the parameters */
assert_param(IS_FSMC_WAIT_FEATURE(FSMC_PCCARDInitStruct->FSMC_Waitfeature));
assert_param(IS_FSMC_TCLR_TIME(FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime));
assert_param(IS_FSMC_TAR_TIME(FSMC_PCCARDInitStruct->FSMC_TARSetupTime));
assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime));
assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime));
assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime));
assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime));
assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime));
assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime));
assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime));
assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime));
assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime));
assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime));
assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime));
assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime));
/* Set the PCR4 register value according to FSMC_PCCARDInitStruct parameters */
FSMC_Bank4->PCR4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_Waitfeature |
FSMC_MemoryDataWidth_16b |
(FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime << 9) |
(FSMC_PCCARDInitStruct->FSMC_TARSetupTime << 13);
/* Set PMEM4 register value according to FSMC_CommonSpaceTimingStructure parameters */
FSMC_Bank4->PMEM4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime |
(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24);
/* Set PATT4 register value according to FSMC_AttributeSpaceTimingStructure parameters */
FSMC_Bank4->PATT4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime |
(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24);
/* Set PIO4 register value according to FSMC_IOSpaceTimingStructure parameters */
FSMC_Bank4->PIO4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime |
(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime << 24);
}
/**
* @brief Fills each FSMC_NORSRAMInitStruct member with its default value.
* @param FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef
* structure which will be initialized.
* @retval None
*/
void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
{
/* Reset NOR/SRAM Init structure parameters values */
FSMC_NORSRAMInitStruct->FSMC_Bank = FSMC_Bank1_NORSRAM1;
FSMC_NORSRAMInitStruct->FSMC_DataAddressMux = FSMC_DataAddressMux_Enable;
FSMC_NORSRAMInitStruct->FSMC_MemoryType = FSMC_MemoryType_SRAM;
FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b;
FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
FSMC_NORSRAMInitStruct->FSMC_WrapMode = FSMC_WrapMode_Disable;
FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
FSMC_NORSRAMInitStruct->FSMC_WriteOperation = FSMC_WriteOperation_Enable;
FSMC_NORSRAMInitStruct->FSMC_WaitSignal = FSMC_WaitSignal_Enable;
FSMC_NORSRAMInitStruct->FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
FSMC_NORSRAMInitStruct->FSMC_WriteBurst = FSMC_WriteBurst_Disable;
FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime = 0xF;
FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime = 0xF;
FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime = 0xFF;
FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF;
FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision = 0xF;
FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency = 0xF;
FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A;
FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime = 0xF;
FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime = 0xF;
FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime = 0xFF;
FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF;
FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision = 0xF;
FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency = 0xF;
FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A;
}
/**
* @brief Fills each FSMC_NANDInitStruct member with its default value.
* @param FSMC_NANDInitStruct: pointer to a FSMC_NANDInitTypeDef
* structure which will be initialized.
* @retval None
*/
void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
{
/* Reset NAND Init structure parameters values */
FSMC_NANDInitStruct->FSMC_Bank = FSMC_Bank2_NAND;
FSMC_NANDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable;
FSMC_NANDInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b;
FSMC_NANDInitStruct->FSMC_ECC = FSMC_ECC_Disable;
FSMC_NANDInitStruct->FSMC_ECCPageSize = FSMC_ECCPageSize_256Bytes;
FSMC_NANDInitStruct->FSMC_TCLRSetupTime = 0x0;
FSMC_NANDInitStruct->FSMC_TARSetupTime = 0x0;
FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC;
FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC;
FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
}
/**
* @brief Fills each FSMC_PCCARDInitStruct member with its default value.
* @param FSMC_PCCARDInitStruct: pointer to a FSMC_PCCARDInitTypeDef
* structure which will be initialized.
* @retval None
*/
void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
{
/* Reset PCCARD Init structure parameters values */
FSMC_PCCARDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable;
FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime = 0x0;
FSMC_PCCARDInitStruct->FSMC_TARSetupTime = 0x0;
FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC;
FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC;
FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime = 0xFC;
FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
}
/**
* @brief Enables or disables the specified NOR/SRAM Memory Bank.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1
* @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2
* @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3
* @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4
* @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState)
{
assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the selected NOR/SRAM Bank by setting the PBKEN bit in the BCRx register */
FSMC_Bank1->BTCR[FSMC_Bank] |= BCR_MBKEN_Set;
}
else
{
/* Disable the selected NOR/SRAM Bank by clearing the PBKEN bit in the BCRx register */
FSMC_Bank1->BTCR[FSMC_Bank] &= BCR_MBKEN_Reset;
}
}
/**
* @brief Enables or disables the specified NAND Memory Bank.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
* @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
* @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState)
{
assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the selected NAND Bank by setting the PBKEN bit in the PCRx register */
if(FSMC_Bank == FSMC_Bank2_NAND)
{
FSMC_Bank2->PCR2 |= PCR_PBKEN_Set;
}
else
{
FSMC_Bank3->PCR3 |= PCR_PBKEN_Set;
}
}
else
{
/* Disable the selected NAND Bank by clearing the PBKEN bit in the PCRx register */
if(FSMC_Bank == FSMC_Bank2_NAND)
{
FSMC_Bank2->PCR2 &= PCR_PBKEN_Reset;
}
else
{
FSMC_Bank3->PCR3 &= PCR_PBKEN_Reset;
}
}
}
/**
* @brief Enables or disables the PCCARD Memory Bank.
* @param NewState: new state of the PCCARD Memory Bank.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void FSMC_PCCARDCmd(FunctionalState NewState)
{
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the PCCARD Bank by setting the PBKEN bit in the PCR4 register */
FSMC_Bank4->PCR4 |= PCR_PBKEN_Set;
}
else
{
/* Disable the PCCARD Bank by clearing the PBKEN bit in the PCR4 register */
FSMC_Bank4->PCR4 &= PCR_PBKEN_Reset;
}
}
/**
* @brief Enables or disables the FSMC NAND ECC feature.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
* @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
* @param NewState: new state of the FSMC NAND ECC feature.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState)
{
assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the selected NAND Bank ECC function by setting the ECCEN bit in the PCRx register */
if(FSMC_Bank == FSMC_Bank2_NAND)
{
FSMC_Bank2->PCR2 |= PCR_ECCEN_Set;
}
else
{
FSMC_Bank3->PCR3 |= PCR_ECCEN_Set;
}
}
else
{
/* Disable the selected NAND Bank ECC function by clearing the ECCEN bit in the PCRx register */
if(FSMC_Bank == FSMC_Bank2_NAND)
{
FSMC_Bank2->PCR2 &= PCR_ECCEN_Reset;
}
else
{
FSMC_Bank3->PCR3 &= PCR_ECCEN_Reset;
}
}
}
/**
* @brief Returns the error correction code register value.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
* @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
* @retval The Error Correction Code (ECC) value.
*/
uint32_t FSMC_GetECC(uint32_t FSMC_Bank)
{
uint32_t eccval = 0x00000000;
if(FSMC_Bank == FSMC_Bank2_NAND)
{
/* Get the ECCR2 register value */
eccval = FSMC_Bank2->ECCR2;
}
else
{
/* Get the ECCR3 register value */
eccval = FSMC_Bank3->ECCR3;
}
/* Return the error correction code value */
return(eccval);
}
/**
* @brief Enables or disables the specified FSMC interrupts.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
* @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
* @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
* @param FSMC_IT: specifies the FSMC interrupt sources to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg FSMC_IT_RisingEdge: Rising edge detection interrupt.
* @arg FSMC_IT_Level: Level edge detection interrupt.
* @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
* @param NewState: new state of the specified FSMC interrupts.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState)
{
assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
assert_param(IS_FSMC_IT(FSMC_IT));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the selected FSMC_Bank2 interrupts */
if(FSMC_Bank == FSMC_Bank2_NAND)
{
FSMC_Bank2->SR2 |= FSMC_IT;
}
/* Enable the selected FSMC_Bank3 interrupts */
else if (FSMC_Bank == FSMC_Bank3_NAND)
{
FSMC_Bank3->SR3 |= FSMC_IT;
}
/* Enable the selected FSMC_Bank4 interrupts */
else
{
FSMC_Bank4->SR4 |= FSMC_IT;
}
}
else
{
/* Disable the selected FSMC_Bank2 interrupts */
if(FSMC_Bank == FSMC_Bank2_NAND)
{
FSMC_Bank2->SR2 &= (uint32_t)~FSMC_IT;
}
/* Disable the selected FSMC_Bank3 interrupts */
else if (FSMC_Bank == FSMC_Bank3_NAND)
{
FSMC_Bank3->SR3 &= (uint32_t)~FSMC_IT;
}
/* Disable the selected FSMC_Bank4 interrupts */
else
{
FSMC_Bank4->SR4 &= (uint32_t)~FSMC_IT;
}
}
}
/**
* @brief Checks whether the specified FSMC flag is set or not.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
* @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
* @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
* @param FSMC_FLAG: specifies the flag to check.
* This parameter can be one of the following values:
* @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag.
* @arg FSMC_FLAG_Level: Level detection Flag.
* @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag.
* @arg FSMC_FLAG_FEMPT: Fifo empty Flag.
* @retval The new state of FSMC_FLAG (SET or RESET).
*/
FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
{
FlagStatus bitstatus = RESET;
uint32_t tmpsr = 0x00000000;
/* Check the parameters */
assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank));
assert_param(IS_FSMC_GET_FLAG(FSMC_FLAG));
if(FSMC_Bank == FSMC_Bank2_NAND)
{
tmpsr = FSMC_Bank2->SR2;
}
else if(FSMC_Bank == FSMC_Bank3_NAND)
{
tmpsr = FSMC_Bank3->SR3;
}
/* FSMC_Bank4_PCCARD*/
else
{
tmpsr = FSMC_Bank4->SR4;
}
/* Get the flag status */
if ((tmpsr & FSMC_FLAG) != (uint16_t)RESET )
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
/* Return the flag status */
return bitstatus;
}
/**
* @brief Clears the FSMC's pending flags.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
* @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
* @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
* @param FSMC_FLAG: specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag.
* @arg FSMC_FLAG_Level: Level detection Flag.
* @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag.
* @retval None
*/
void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
{
/* Check the parameters */
assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank));
assert_param(IS_FSMC_CLEAR_FLAG(FSMC_FLAG)) ;
if(FSMC_Bank == FSMC_Bank2_NAND)
{
FSMC_Bank2->SR2 &= ~FSMC_FLAG;
}
else if(FSMC_Bank == FSMC_Bank3_NAND)
{
FSMC_Bank3->SR3 &= ~FSMC_FLAG;
}
/* FSMC_Bank4_PCCARD*/
else
{
FSMC_Bank4->SR4 &= ~FSMC_FLAG;
}
}
/**
* @brief Checks whether the specified FSMC interrupt has occurred or not.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
* @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
* @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
* @param FSMC_IT: specifies the FSMC interrupt source to check.
* This parameter can be one of the following values:
* @arg FSMC_IT_RisingEdge: Rising edge detection interrupt.
* @arg FSMC_IT_Level: Level edge detection interrupt.
* @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
* @retval The new state of FSMC_IT (SET or RESET).
*/
ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT)
{
ITStatus bitstatus = RESET;
uint32_t tmpsr = 0x0, itstatus = 0x0, itenable = 0x0;
/* Check the parameters */
assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
assert_param(IS_FSMC_GET_IT(FSMC_IT));
if(FSMC_Bank == FSMC_Bank2_NAND)
{
tmpsr = FSMC_Bank2->SR2;
}
else if(FSMC_Bank == FSMC_Bank3_NAND)
{
tmpsr = FSMC_Bank3->SR3;
}
/* FSMC_Bank4_PCCARD*/
else
{
tmpsr = FSMC_Bank4->SR4;
}
itstatus = tmpsr & FSMC_IT;
itenable = tmpsr & (FSMC_IT >> 3);
if ((itstatus != (uint32_t)RESET) && (itenable != (uint32_t)RESET))
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @brief Clears the FSMC's interrupt pending bits.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
* @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
* @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
* @param FSMC_IT: specifies the interrupt pending bit to clear.
* This parameter can be any combination of the following values:
* @arg FSMC_IT_RisingEdge: Rising edge detection interrupt.
* @arg FSMC_IT_Level: Level edge detection interrupt.
* @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
* @retval None
*/
void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT)
{
/* Check the parameters */
assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
assert_param(IS_FSMC_IT(FSMC_IT));
if(FSMC_Bank == FSMC_Bank2_NAND)
{
FSMC_Bank2->SR2 &= ~(FSMC_IT >> 3);
}
else if(FSMC_Bank == FSMC_Bank3_NAND)
{
FSMC_Bank3->SR3 &= ~(FSMC_IT >> 3);
}
/* FSMC_Bank4_PCCARD*/
else
{
FSMC_Bank4->SR4 &= ~(FSMC_IT >> 3);
}
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

733
3-5 GPIO_光敏传感器/Library/stm32f10x_fsmc.h Normal file
View File

@@ -0,0 +1,733 @@
/**
******************************************************************************
* @file stm32f10x_fsmc.h
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the FSMC firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_FSMC_H
#define __STM32F10x_FSMC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @addtogroup FSMC
* @{
*/
/** @defgroup FSMC_Exported_Types
* @{
*/
/**
* @brief Timing parameters For NOR/SRAM Banks
*/
typedef struct
{
uint32_t FSMC_AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
the duration of the address setup time.
This parameter can be a value between 0 and 0xF.
@note: It is not used with synchronous NOR Flash memories. */
uint32_t FSMC_AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
the duration of the address hold time.
This parameter can be a value between 0 and 0xF.
@note: It is not used with synchronous NOR Flash memories.*/
uint32_t FSMC_DataSetupTime; /*!< Defines the number of HCLK cycles to configure
the duration of the data setup time.
This parameter can be a value between 0 and 0xFF.
@note: It is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */
uint32_t FSMC_BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
the duration of the bus turnaround.
This parameter can be a value between 0 and 0xF.
@note: It is only used for multiplexed NOR Flash memories. */
uint32_t FSMC_CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles.
This parameter can be a value between 1 and 0xF.
@note: This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */
uint32_t FSMC_DataLatency; /*!< Defines the number of memory clock cycles to issue
to the memory before getting the first data.
The value of this parameter depends on the memory type as shown below:
- It must be set to 0 in case of a CRAM
- It is don't care in asynchronous NOR, SRAM or ROM accesses
- It may assume a value between 0 and 0xF in NOR Flash memories
with synchronous burst mode enable */
uint32_t FSMC_AccessMode; /*!< Specifies the asynchronous access mode.
This parameter can be a value of @ref FSMC_Access_Mode */
}FSMC_NORSRAMTimingInitTypeDef;
/**
* @brief FSMC NOR/SRAM Init structure definition
*/
typedef struct
{
uint32_t FSMC_Bank; /*!< Specifies the NOR/SRAM memory bank that will be used.
This parameter can be a value of @ref FSMC_NORSRAM_Bank */
uint32_t FSMC_DataAddressMux; /*!< Specifies whether the address and data values are
multiplexed on the databus or not.
This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */
uint32_t FSMC_MemoryType; /*!< Specifies the type of external memory attached to
the corresponding memory bank.
This parameter can be a value of @ref FSMC_Memory_Type */
uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width.
This parameter can be a value of @ref FSMC_Data_Width */
uint32_t FSMC_BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
valid only with synchronous burst Flash memories.
This parameter can be a value of @ref FSMC_Burst_Access_Mode */
uint32_t FSMC_AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
valid only with asynchronous Flash memories.
This parameter can be a value of @ref FSMC_AsynchronousWait */
uint32_t FSMC_WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
the Flash memory in burst mode.
This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */
uint32_t FSMC_WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
memory, valid only when accessing Flash memories in burst mode.
This parameter can be a value of @ref FSMC_Wrap_Mode */
uint32_t FSMC_WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
clock cycle before the wait state or during the wait state,
valid only when accessing memories in burst mode.
This parameter can be a value of @ref FSMC_Wait_Timing */
uint32_t FSMC_WriteOperation; /*!< Enables or disables the write operation in the selected bank by the FSMC.
This parameter can be a value of @ref FSMC_Write_Operation */
uint32_t FSMC_WaitSignal; /*!< Enables or disables the wait-state insertion via wait
signal, valid for Flash memory access in burst mode.
This parameter can be a value of @ref FSMC_Wait_Signal */
uint32_t FSMC_ExtendedMode; /*!< Enables or disables the extended mode.
This parameter can be a value of @ref FSMC_Extended_Mode */
uint32_t FSMC_WriteBurst; /*!< Enables or disables the write burst operation.
This parameter can be a value of @ref FSMC_Write_Burst */
FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the ExtendedMode is not used*/
FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct; /*!< Timing Parameters for write access if the ExtendedMode is used*/
}FSMC_NORSRAMInitTypeDef;
/**
* @brief Timing parameters For FSMC NAND and PCCARD Banks
*/
typedef struct
{
uint32_t FSMC_SetupTime; /*!< Defines the number of HCLK cycles to setup address before
the command assertion for NAND-Flash read or write access
to common/Attribute or I/O memory space (depending on
the memory space timing to be configured).
This parameter can be a value between 0 and 0xFF.*/
uint32_t FSMC_WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
command for NAND-Flash read or write access to
common/Attribute or I/O memory space (depending on the
memory space timing to be configured).
This parameter can be a number between 0x00 and 0xFF */
uint32_t FSMC_HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
(and data for write access) after the command deassertion
for NAND-Flash read or write access to common/Attribute
or I/O memory space (depending on the memory space timing
to be configured).
This parameter can be a number between 0x00 and 0xFF */
uint32_t FSMC_HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
databus is kept in HiZ after the start of a NAND-Flash
write access to common/Attribute or I/O memory space (depending
on the memory space timing to be configured).
This parameter can be a number between 0x00 and 0xFF */
}FSMC_NAND_PCCARDTimingInitTypeDef;
/**
* @brief FSMC NAND Init structure definition
*/
typedef struct
{
uint32_t FSMC_Bank; /*!< Specifies the NAND memory bank that will be used.
This parameter can be a value of @ref FSMC_NAND_Bank */
uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory Bank.
This parameter can be any value of @ref FSMC_Wait_feature */
uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width.
This parameter can be any value of @ref FSMC_Data_Width */
uint32_t FSMC_ECC; /*!< Enables or disables the ECC computation.
This parameter can be any value of @ref FSMC_ECC */
uint32_t FSMC_ECCPageSize; /*!< Defines the page size for the extended ECC.
This parameter can be any value of @ref FSMC_ECC_Page_Size */
uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
delay between CLE low and RE low.
This parameter can be a value between 0 and 0xFF. */
uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
delay between ALE low and RE low.
This parameter can be a number between 0x0 and 0xFF */
FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */
FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */
}FSMC_NANDInitTypeDef;
/**
* @brief FSMC PCCARD Init structure definition
*/
typedef struct
{
uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the Memory Bank.
This parameter can be any value of @ref FSMC_Wait_feature */
uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
delay between CLE low and RE low.
This parameter can be a value between 0 and 0xFF. */
uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
delay between ALE low and RE low.
This parameter can be a number between 0x0 and 0xFF */
FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */
FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */
FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_IOSpaceTimingStruct; /*!< FSMC IO Space Timing */
}FSMC_PCCARDInitTypeDef;
/**
* @}
*/
/** @defgroup FSMC_Exported_Constants
* @{
*/
/** @defgroup FSMC_NORSRAM_Bank
* @{
*/
#define FSMC_Bank1_NORSRAM1 ((uint32_t)0x00000000)
#define FSMC_Bank1_NORSRAM2 ((uint32_t)0x00000002)
#define FSMC_Bank1_NORSRAM3 ((uint32_t)0x00000004)
#define FSMC_Bank1_NORSRAM4 ((uint32_t)0x00000006)
/**
* @}
*/
/** @defgroup FSMC_NAND_Bank
* @{
*/
#define FSMC_Bank2_NAND ((uint32_t)0x00000010)
#define FSMC_Bank3_NAND ((uint32_t)0x00000100)
/**
* @}
*/
/** @defgroup FSMC_PCCARD_Bank
* @{
*/
#define FSMC_Bank4_PCCARD ((uint32_t)0x00001000)
/**
* @}
*/
#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \
((BANK) == FSMC_Bank1_NORSRAM2) || \
((BANK) == FSMC_Bank1_NORSRAM3) || \
((BANK) == FSMC_Bank1_NORSRAM4))
#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
((BANK) == FSMC_Bank3_NAND))
#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
((BANK) == FSMC_Bank3_NAND) || \
((BANK) == FSMC_Bank4_PCCARD))
#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
((BANK) == FSMC_Bank3_NAND) || \
((BANK) == FSMC_Bank4_PCCARD))
/** @defgroup NOR_SRAM_Controller
* @{
*/
/** @defgroup FSMC_Data_Address_Bus_Multiplexing
* @{
*/
#define FSMC_DataAddressMux_Disable ((uint32_t)0x00000000)
#define FSMC_DataAddressMux_Enable ((uint32_t)0x00000002)
#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \
((MUX) == FSMC_DataAddressMux_Enable))
/**
* @}
*/
/** @defgroup FSMC_Memory_Type
* @{
*/
#define FSMC_MemoryType_SRAM ((uint32_t)0x00000000)
#define FSMC_MemoryType_PSRAM ((uint32_t)0x00000004)
#define FSMC_MemoryType_NOR ((uint32_t)0x00000008)
#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \
((MEMORY) == FSMC_MemoryType_PSRAM)|| \
((MEMORY) == FSMC_MemoryType_NOR))
/**
* @}
*/
/** @defgroup FSMC_Data_Width
* @{
*/
#define FSMC_MemoryDataWidth_8b ((uint32_t)0x00000000)
#define FSMC_MemoryDataWidth_16b ((uint32_t)0x00000010)
#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \
((WIDTH) == FSMC_MemoryDataWidth_16b))
/**
* @}
*/
/** @defgroup FSMC_Burst_Access_Mode
* @{
*/
#define FSMC_BurstAccessMode_Disable ((uint32_t)0x00000000)
#define FSMC_BurstAccessMode_Enable ((uint32_t)0x00000100)
#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \
((STATE) == FSMC_BurstAccessMode_Enable))
/**
* @}
*/
/** @defgroup FSMC_AsynchronousWait
* @{
*/
#define FSMC_AsynchronousWait_Disable ((uint32_t)0x00000000)
#define FSMC_AsynchronousWait_Enable ((uint32_t)0x00008000)
#define IS_FSMC_ASYNWAIT(STATE) (((STATE) == FSMC_AsynchronousWait_Disable) || \
((STATE) == FSMC_AsynchronousWait_Enable))
/**
* @}
*/
/** @defgroup FSMC_Wait_Signal_Polarity
* @{
*/
#define FSMC_WaitSignalPolarity_Low ((uint32_t)0x00000000)
#define FSMC_WaitSignalPolarity_High ((uint32_t)0x00000200)
#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \
((POLARITY) == FSMC_WaitSignalPolarity_High))
/**
* @}
*/
/** @defgroup FSMC_Wrap_Mode
* @{
*/
#define FSMC_WrapMode_Disable ((uint32_t)0x00000000)
#define FSMC_WrapMode_Enable ((uint32_t)0x00000400)
#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \
((MODE) == FSMC_WrapMode_Enable))
/**
* @}
*/
/** @defgroup FSMC_Wait_Timing
* @{
*/
#define FSMC_WaitSignalActive_BeforeWaitState ((uint32_t)0x00000000)
#define FSMC_WaitSignalActive_DuringWaitState ((uint32_t)0x00000800)
#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \
((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState))
/**
* @}
*/
/** @defgroup FSMC_Write_Operation
* @{
*/
#define FSMC_WriteOperation_Disable ((uint32_t)0x00000000)
#define FSMC_WriteOperation_Enable ((uint32_t)0x00001000)
#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \
((OPERATION) == FSMC_WriteOperation_Enable))
/**
* @}
*/
/** @defgroup FSMC_Wait_Signal
* @{
*/
#define FSMC_WaitSignal_Disable ((uint32_t)0x00000000)
#define FSMC_WaitSignal_Enable ((uint32_t)0x00002000)
#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \
((SIGNAL) == FSMC_WaitSignal_Enable))
/**
* @}
*/
/** @defgroup FSMC_Extended_Mode
* @{
*/
#define FSMC_ExtendedMode_Disable ((uint32_t)0x00000000)
#define FSMC_ExtendedMode_Enable ((uint32_t)0x00004000)
#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \
((MODE) == FSMC_ExtendedMode_Enable))
/**
* @}
*/
/** @defgroup FSMC_Write_Burst
* @{
*/
#define FSMC_WriteBurst_Disable ((uint32_t)0x00000000)
#define FSMC_WriteBurst_Enable ((uint32_t)0x00080000)
#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \
((BURST) == FSMC_WriteBurst_Enable))
/**
* @}
*/
/** @defgroup FSMC_Address_Setup_Time
* @{
*/
#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF)
/**
* @}
*/
/** @defgroup FSMC_Address_Hold_Time
* @{
*/
#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF)
/**
* @}
*/
/** @defgroup FSMC_Data_Setup_Time
* @{
*/
#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF))
/**
* @}
*/
/** @defgroup FSMC_Bus_Turn_around_Duration
* @{
*/
#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF)
/**
* @}
*/
/** @defgroup FSMC_CLK_Division
* @{
*/
#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF)
/**
* @}
*/
/** @defgroup FSMC_Data_Latency
* @{
*/
#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF)
/**
* @}
*/
/** @defgroup FSMC_Access_Mode
* @{
*/
#define FSMC_AccessMode_A ((uint32_t)0x00000000)
#define FSMC_AccessMode_B ((uint32_t)0x10000000)
#define FSMC_AccessMode_C ((uint32_t)0x20000000)
#define FSMC_AccessMode_D ((uint32_t)0x30000000)
#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \
((MODE) == FSMC_AccessMode_B) || \
((MODE) == FSMC_AccessMode_C) || \
((MODE) == FSMC_AccessMode_D))
/**
* @}
*/
/**
* @}
*/
/** @defgroup NAND_PCCARD_Controller
* @{
*/
/** @defgroup FSMC_Wait_feature
* @{
*/
#define FSMC_Waitfeature_Disable ((uint32_t)0x00000000)
#define FSMC_Waitfeature_Enable ((uint32_t)0x00000002)
#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \
((FEATURE) == FSMC_Waitfeature_Enable))
/**
* @}
*/
/** @defgroup FSMC_ECC
* @{
*/
#define FSMC_ECC_Disable ((uint32_t)0x00000000)
#define FSMC_ECC_Enable ((uint32_t)0x00000040)
#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \
((STATE) == FSMC_ECC_Enable))
/**
* @}
*/
/** @defgroup FSMC_ECC_Page_Size
* @{
*/
#define FSMC_ECCPageSize_256Bytes ((uint32_t)0x00000000)
#define FSMC_ECCPageSize_512Bytes ((uint32_t)0x00020000)
#define FSMC_ECCPageSize_1024Bytes ((uint32_t)0x00040000)
#define FSMC_ECCPageSize_2048Bytes ((uint32_t)0x00060000)
#define FSMC_ECCPageSize_4096Bytes ((uint32_t)0x00080000)
#define FSMC_ECCPageSize_8192Bytes ((uint32_t)0x000A0000)
#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \
((SIZE) == FSMC_ECCPageSize_512Bytes) || \
((SIZE) == FSMC_ECCPageSize_1024Bytes) || \
((SIZE) == FSMC_ECCPageSize_2048Bytes) || \
((SIZE) == FSMC_ECCPageSize_4096Bytes) || \
((SIZE) == FSMC_ECCPageSize_8192Bytes))
/**
* @}
*/
/** @defgroup FSMC_TCLR_Setup_Time
* @{
*/
#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF)
/**
* @}
*/
/** @defgroup FSMC_TAR_Setup_Time
* @{
*/
#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF)
/**
* @}
*/
/** @defgroup FSMC_Setup_Time
* @{
*/
#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF)
/**
* @}
*/
/** @defgroup FSMC_Wait_Setup_Time
* @{
*/
#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF)
/**
* @}
*/
/** @defgroup FSMC_Hold_Setup_Time
* @{
*/
#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF)
/**
* @}
*/
/** @defgroup FSMC_HiZ_Setup_Time
* @{
*/
#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF)
/**
* @}
*/
/** @defgroup FSMC_Interrupt_sources
* @{
*/
#define FSMC_IT_RisingEdge ((uint32_t)0x00000008)
#define FSMC_IT_Level ((uint32_t)0x00000010)
#define FSMC_IT_FallingEdge ((uint32_t)0x00000020)
#define IS_FSMC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000))
#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \
((IT) == FSMC_IT_Level) || \
((IT) == FSMC_IT_FallingEdge))
/**
* @}
*/
/** @defgroup FSMC_Flags
* @{
*/
#define FSMC_FLAG_RisingEdge ((uint32_t)0x00000001)
#define FSMC_FLAG_Level ((uint32_t)0x00000002)
#define FSMC_FLAG_FallingEdge ((uint32_t)0x00000004)
#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040)
#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \
((FLAG) == FSMC_FLAG_Level) || \
((FLAG) == FSMC_FLAG_FallingEdge) || \
((FLAG) == FSMC_FLAG_FEMPT))
#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000))
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/** @defgroup FSMC_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup FSMC_Exported_Functions
* @{
*/
void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank);
void FSMC_NANDDeInit(uint32_t FSMC_Bank);
void FSMC_PCCARDDeInit(void);
void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState);
void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState);
void FSMC_PCCARDCmd(FunctionalState NewState);
void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState);
uint32_t FSMC_GetECC(uint32_t FSMC_Bank);
void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState);
FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG);
void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG);
ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT);
void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F10x_FSMC_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

650
3-5 GPIO_光敏传感器/Library/stm32f10x_gpio.c Normal file
View File

@@ -0,0 +1,650 @@
/**
******************************************************************************
* @file stm32f10x_gpio.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the GPIO firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_gpio.h"
#include "stm32f10x_rcc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup GPIO
* @brief GPIO driver modules
* @{
*/
/** @defgroup GPIO_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup GPIO_Private_Defines
* @{
*/
/* ------------ RCC registers bit address in the alias region ----------------*/
#define AFIO_OFFSET (AFIO_BASE - PERIPH_BASE)
/* --- EVENTCR Register -----*/
/* Alias word address of EVOE bit */
#define EVCR_OFFSET (AFIO_OFFSET + 0x00)
#define EVOE_BitNumber ((uint8_t)0x07)
#define EVCR_EVOE_BB (PERIPH_BB_BASE + (EVCR_OFFSET * 32) + (EVOE_BitNumber * 4))
/* --- MAPR Register ---*/
/* Alias word address of MII_RMII_SEL bit */
#define MAPR_OFFSET (AFIO_OFFSET + 0x04)
#define MII_RMII_SEL_BitNumber ((u8)0x17)
#define MAPR_MII_RMII_SEL_BB (PERIPH_BB_BASE + (MAPR_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4))
#define EVCR_PORTPINCONFIG_MASK ((uint16_t)0xFF80)
#define LSB_MASK ((uint16_t)0xFFFF)
#define DBGAFR_POSITION_MASK ((uint32_t)0x000F0000)
#define DBGAFR_SWJCFG_MASK ((uint32_t)0xF0FFFFFF)
#define DBGAFR_LOCATION_MASK ((uint32_t)0x00200000)
#define DBGAFR_NUMBITS_MASK ((uint32_t)0x00100000)
/**
* @}
*/
/** @defgroup GPIO_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup GPIO_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup GPIO_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup GPIO_Private_Functions
* @{
*/
/**
* @brief Deinitializes the GPIOx peripheral registers to their default reset values.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @retval None
*/
void GPIO_DeInit(GPIO_TypeDef* GPIOx)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
if (GPIOx == GPIOA)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE);
}
else if (GPIOx == GPIOB)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE);
}
else if (GPIOx == GPIOC)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE);
}
else if (GPIOx == GPIOD)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE);
}
else if (GPIOx == GPIOE)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE);
}
else if (GPIOx == GPIOF)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, DISABLE);
}
else
{
if (GPIOx == GPIOG)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, DISABLE);
}
}
}
/**
* @brief Deinitializes the Alternate Functions (remap, event control
* and EXTI configuration) registers to their default reset values.
* @param None
* @retval None
*/
void GPIO_AFIODeInit(void)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE);
}
/**
* @brief Initializes the GPIOx peripheral according to the specified
* parameters in the GPIO_InitStruct.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that
* contains the configuration information for the specified GPIO peripheral.
* @retval None
*/
void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct)
{
uint32_t currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00;
uint32_t tmpreg = 0x00, pinmask = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode));
assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin));
/*---------------------------- GPIO Mode Configuration -----------------------*/
currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F);
if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00)
{
/* Check the parameters */
assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed));
/* Output mode */
currentmode |= (uint32_t)GPIO_InitStruct->GPIO_Speed;
}
/*---------------------------- GPIO CRL Configuration ------------------------*/
/* Configure the eight low port pins */
if (((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00)
{
tmpreg = GPIOx->CRL;
for (pinpos = 0x00; pinpos < 0x08; pinpos++)
{
pos = ((uint32_t)0x01) << pinpos;
/* Get the port pins position */
currentpin = (GPIO_InitStruct->GPIO_Pin) & pos;
if (currentpin == pos)
{
pos = pinpos << 2;
/* Clear the corresponding low control register bits */
pinmask = ((uint32_t)0x0F) << pos;
tmpreg &= ~pinmask;
/* Write the mode configuration in the corresponding bits */
tmpreg |= (currentmode << pos);
/* Reset the corresponding ODR bit */
if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
{
GPIOx->BRR = (((uint32_t)0x01) << pinpos);
}
else
{
/* Set the corresponding ODR bit */
if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
{
GPIOx->BSRR = (((uint32_t)0x01) << pinpos);
}
}
}
}
GPIOx->CRL = tmpreg;
}
/*---------------------------- GPIO CRH Configuration ------------------------*/
/* Configure the eight high port pins */
if (GPIO_InitStruct->GPIO_Pin > 0x00FF)
{
tmpreg = GPIOx->CRH;
for (pinpos = 0x00; pinpos < 0x08; pinpos++)
{
pos = (((uint32_t)0x01) << (pinpos + 0x08));
/* Get the port pins position */
currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos);
if (currentpin == pos)
{
pos = pinpos << 2;
/* Clear the corresponding high control register bits */
pinmask = ((uint32_t)0x0F) << pos;
tmpreg &= ~pinmask;
/* Write the mode configuration in the corresponding bits */
tmpreg |= (currentmode << pos);
/* Reset the corresponding ODR bit */
if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
{
GPIOx->BRR = (((uint32_t)0x01) << (pinpos + 0x08));
}
/* Set the corresponding ODR bit */
if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
{
GPIOx->BSRR = (((uint32_t)0x01) << (pinpos + 0x08));
}
}
}
GPIOx->CRH = tmpreg;
}
}
/**
* @brief Fills each GPIO_InitStruct member with its default value.
* @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will
* be initialized.
* @retval None
*/
void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct)
{
/* Reset GPIO init structure parameters values */
GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All;
GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz;
GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING;
}
/**
* @brief Reads the specified input port pin.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bit to read.
* This parameter can be GPIO_Pin_x where x can be (0..15).
* @retval The input port pin value.
*/
uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
uint8_t bitstatus = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET)
{
bitstatus = (uint8_t)Bit_SET;
}
else
{
bitstatus = (uint8_t)Bit_RESET;
}
return bitstatus;
}
/**
* @brief Reads the specified GPIO input data port.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @retval GPIO input data port value.
*/
uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
return ((uint16_t)GPIOx->IDR);
}
/**
* @brief Reads the specified output data port bit.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bit to read.
* This parameter can be GPIO_Pin_x where x can be (0..15).
* @retval The output port pin value.
*/
uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
uint8_t bitstatus = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET)
{
bitstatus = (uint8_t)Bit_SET;
}
else
{
bitstatus = (uint8_t)Bit_RESET;
}
return bitstatus;
}
/**
* @brief Reads the specified GPIO output data port.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @retval GPIO output data port value.
*/
uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
return ((uint16_t)GPIOx->ODR);
}
/**
* @brief Sets the selected data port bits.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bits to be written.
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
* @retval None
*/
void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Pin));
GPIOx->BSRR = GPIO_Pin;
}
/**
* @brief Clears the selected data port bits.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bits to be written.
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
* @retval None
*/
void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Pin));
GPIOx->BRR = GPIO_Pin;
}
/**
* @brief Sets or clears the selected data port bit.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bit to be written.
* This parameter can be one of GPIO_Pin_x where x can be (0..15).
* @param BitVal: specifies the value to be written to the selected bit.
* This parameter can be one of the BitAction enum values:
* @arg Bit_RESET: to clear the port pin
* @arg Bit_SET: to set the port pin
* @retval None
*/
void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
assert_param(IS_GPIO_BIT_ACTION(BitVal));
if (BitVal != Bit_RESET)
{
GPIOx->BSRR = GPIO_Pin;
}
else
{
GPIOx->BRR = GPIO_Pin;
}
}
/**
* @brief Writes data to the specified GPIO data port.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param PortVal: specifies the value to be written to the port output data register.
* @retval None
*/
void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
GPIOx->ODR = PortVal;
}
/**
* @brief Locks GPIO Pins configuration registers.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bit to be written.
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
* @retval None
*/
void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
uint32_t tmp = 0x00010000;
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Pin));
tmp |= GPIO_Pin;
/* Set LCKK bit */
GPIOx->LCKR = tmp;
/* Reset LCKK bit */
GPIOx->LCKR = GPIO_Pin;
/* Set LCKK bit */
GPIOx->LCKR = tmp;
/* Read LCKK bit*/
tmp = GPIOx->LCKR;
/* Read LCKK bit*/
tmp = GPIOx->LCKR;
}
/**
* @brief Selects the GPIO pin used as Event output.
* @param GPIO_PortSource: selects the GPIO port to be used as source
* for Event output.
* This parameter can be GPIO_PortSourceGPIOx where x can be (A..E).
* @param GPIO_PinSource: specifies the pin for the Event output.
* This parameter can be GPIO_PinSourcex where x can be (0..15).
* @retval None
*/
void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource)
{
uint32_t tmpreg = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource));
assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
tmpreg = AFIO->EVCR;
/* Clear the PORT[6:4] and PIN[3:0] bits */
tmpreg &= EVCR_PORTPINCONFIG_MASK;
tmpreg |= (uint32_t)GPIO_PortSource << 0x04;
tmpreg |= GPIO_PinSource;
AFIO->EVCR = tmpreg;
}
/**
* @brief Enables or disables the Event Output.
* @param NewState: new state of the Event output.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void GPIO_EventOutputCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
*(__IO uint32_t *) EVCR_EVOE_BB = (uint32_t)NewState;
}
/**
* @brief Changes the mapping of the specified pin.
* @param GPIO_Remap: selects the pin to remap.
* This parameter can be one of the following values:
* @arg GPIO_Remap_SPI1 : SPI1 Alternate Function mapping
* @arg GPIO_Remap_I2C1 : I2C1 Alternate Function mapping
* @arg GPIO_Remap_USART1 : USART1 Alternate Function mapping
* @arg GPIO_Remap_USART2 : USART2 Alternate Function mapping
* @arg GPIO_PartialRemap_USART3 : USART3 Partial Alternate Function mapping
* @arg GPIO_FullRemap_USART3 : USART3 Full Alternate Function mapping
* @arg GPIO_PartialRemap_TIM1 : TIM1 Partial Alternate Function mapping
* @arg GPIO_FullRemap_TIM1 : TIM1 Full Alternate Function mapping
* @arg GPIO_PartialRemap1_TIM2 : TIM2 Partial1 Alternate Function mapping
* @arg GPIO_PartialRemap2_TIM2 : TIM2 Partial2 Alternate Function mapping
* @arg GPIO_FullRemap_TIM2 : TIM2 Full Alternate Function mapping
* @arg GPIO_PartialRemap_TIM3 : TIM3 Partial Alternate Function mapping
* @arg GPIO_FullRemap_TIM3 : TIM3 Full Alternate Function mapping
* @arg GPIO_Remap_TIM4 : TIM4 Alternate Function mapping
* @arg GPIO_Remap1_CAN1 : CAN1 Alternate Function mapping
* @arg GPIO_Remap2_CAN1 : CAN1 Alternate Function mapping
* @arg GPIO_Remap_PD01 : PD01 Alternate Function mapping
* @arg GPIO_Remap_TIM5CH4_LSI : LSI connected to TIM5 Channel4 input capture for calibration
* @arg GPIO_Remap_ADC1_ETRGINJ : ADC1 External Trigger Injected Conversion remapping
* @arg GPIO_Remap_ADC1_ETRGREG : ADC1 External Trigger Regular Conversion remapping
* @arg GPIO_Remap_ADC2_ETRGINJ : ADC2 External Trigger Injected Conversion remapping
* @arg GPIO_Remap_ADC2_ETRGREG : ADC2 External Trigger Regular Conversion remapping
* @arg GPIO_Remap_ETH : Ethernet remapping (only for Connectivity line devices)
* @arg GPIO_Remap_CAN2 : CAN2 remapping (only for Connectivity line devices)
* @arg GPIO_Remap_SWJ_NoJTRST : Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST
* @arg GPIO_Remap_SWJ_JTAGDisable : JTAG-DP Disabled and SW-DP Enabled
* @arg GPIO_Remap_SWJ_Disable : Full SWJ Disabled (JTAG-DP + SW-DP)
* @arg GPIO_Remap_SPI3 : SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices)
* When the SPI3/I2S3 is remapped using this function, the SWJ is configured
* to Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST.
* @arg GPIO_Remap_TIM2ITR1_PTP_SOF : Ethernet PTP output or USB OTG SOF (Start of Frame) connected
* to TIM2 Internal Trigger 1 for calibration (only for Connectivity line devices)
* If the GPIO_Remap_TIM2ITR1_PTP_SOF is enabled the TIM2 ITR1 is connected to
* Ethernet PTP output. When Reset TIM2 ITR1 is connected to USB OTG SOF output.
* @arg GPIO_Remap_PTP_PPS : Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices)
* @arg GPIO_Remap_TIM15 : TIM15 Alternate Function mapping (only for Value line devices)
* @arg GPIO_Remap_TIM16 : TIM16 Alternate Function mapping (only for Value line devices)
* @arg GPIO_Remap_TIM17 : TIM17 Alternate Function mapping (only for Value line devices)
* @arg GPIO_Remap_CEC : CEC Alternate Function mapping (only for Value line devices)
* @arg GPIO_Remap_TIM1_DMA : TIM1 DMA requests mapping (only for Value line devices)
* @arg GPIO_Remap_TIM9 : TIM9 Alternate Function mapping (only for XL-density devices)
* @arg GPIO_Remap_TIM10 : TIM10 Alternate Function mapping (only for XL-density devices)
* @arg GPIO_Remap_TIM11 : TIM11 Alternate Function mapping (only for XL-density devices)
* @arg GPIO_Remap_TIM13 : TIM13 Alternate Function mapping (only for High density Value line and XL-density devices)
* @arg GPIO_Remap_TIM14 : TIM14 Alternate Function mapping (only for High density Value line and XL-density devices)
* @arg GPIO_Remap_FSMC_NADV : FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices)
* @arg GPIO_Remap_TIM67_DAC_DMA : TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices)
* @arg GPIO_Remap_TIM12 : TIM12 Alternate Function mapping (only for High density Value line devices)
* @arg GPIO_Remap_MISC : Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping,
* only for High density Value line devices)
* @param NewState: new state of the port pin remapping.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState)
{
uint32_t tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_REMAP(GPIO_Remap));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if((GPIO_Remap & 0x80000000) == 0x80000000)
{
tmpreg = AFIO->MAPR2;
}
else
{
tmpreg = AFIO->MAPR;
}
tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10;
tmp = GPIO_Remap & LSB_MASK;
if ((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK))
{
tmpreg &= DBGAFR_SWJCFG_MASK;
AFIO->MAPR &= DBGAFR_SWJCFG_MASK;
}
else if ((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK)
{
tmp1 = ((uint32_t)0x03) << tmpmask;
tmpreg &= ~tmp1;
tmpreg |= ~DBGAFR_SWJCFG_MASK;
}
else
{
tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15)*0x10));
tmpreg |= ~DBGAFR_SWJCFG_MASK;
}
if (NewState != DISABLE)
{
tmpreg |= (tmp << ((GPIO_Remap >> 0x15)*0x10));
}
if((GPIO_Remap & 0x80000000) == 0x80000000)
{
AFIO->MAPR2 = tmpreg;
}
else
{
AFIO->MAPR = tmpreg;
}
}
/**
* @brief Selects the GPIO pin used as EXTI Line.
* @param GPIO_PortSource: selects the GPIO port to be used as source for EXTI lines.
* This parameter can be GPIO_PortSourceGPIOx where x can be (A..G).
* @param GPIO_PinSource: specifies the EXTI line to be configured.
* This parameter can be GPIO_PinSourcex where x can be (0..15).
* @retval None
*/
void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource)
{
uint32_t tmp = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource));
assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
tmp = ((uint32_t)0x0F) << (0x04 * (GPIO_PinSource & (uint8_t)0x03));
AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp;
AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((uint32_t)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (uint8_t)0x03)));
}
/**
* @brief Selects the Ethernet media interface.
* @note This function applies only to STM32 Connectivity line devices.
* @param GPIO_ETH_MediaInterface: specifies the Media Interface mode.
* This parameter can be one of the following values:
* @arg GPIO_ETH_MediaInterface_MII: MII mode
* @arg GPIO_ETH_MediaInterface_RMII: RMII mode
* @retval None
*/
void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface)
{
assert_param(IS_GPIO_ETH_MEDIA_INTERFACE(GPIO_ETH_MediaInterface));
/* Configure MII_RMII selection bit */
*(__IO uint32_t *) MAPR_MII_RMII_SEL_BB = GPIO_ETH_MediaInterface;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/