diff --git a/3-5 GPIO_光敏传感器/Library/misc.c b/3-5 GPIO_光敏传感器/Library/misc.c new file mode 100644 index 0000000..ec9165f --- /dev/null +++ b/3-5 GPIO_光敏传感器/Library/misc.c @@ -0,0 +1,225 @@ +/** + ****************************************************************************** + * @file misc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the miscellaneous firmware functions (add-on + * to CMSIS functions). + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "misc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup MISC + * @brief MISC driver modules + * @{ + */ + +/** @defgroup MISC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_Defines + * @{ + */ + +#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000) +/** + * @} + */ + +/** @defgroup MISC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_Functions + * @{ + */ + +/** + * @brief Configures the priority grouping: pre-emption priority and subpriority. + * @param NVIC_PriorityGroup: specifies the priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority + * 4 bits for subpriority + * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority + * 3 bits for subpriority + * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority + * 2 bits for subpriority + * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority + * 1 bits for subpriority + * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority + * 0 bits for subpriority + * @retval None + */ +void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */ + SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup; +} + +/** + * @brief Initializes the NVIC peripheral according to the specified + * parameters in the NVIC_InitStruct. + * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains + * the configuration information for the specified NVIC peripheral. + * @retval None + */ +void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct) +{ + uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F; + + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority)); + assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority)); + + if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE) + { + /* Compute the Corresponding IRQ Priority --------------------------------*/ + tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08; + tmppre = (0x4 - tmppriority); + tmpsub = tmpsub >> tmppriority; + + tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre; + tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub; + tmppriority = tmppriority << 0x04; + + NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority; + + /* Enable the Selected IRQ Channels --------------------------------------*/ + NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = + (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); + } + else + { + /* Disable the Selected IRQ Channels -------------------------------------*/ + NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = + (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); + } +} + +/** + * @brief Sets the vector table location and Offset. + * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory. + * This parameter can be one of the following values: + * @arg NVIC_VectTab_RAM + * @arg NVIC_VectTab_FLASH + * @param Offset: Vector Table base offset field. This value must be a multiple + * of 0x200. + * @retval None + */ +void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset) +{ + /* Check the parameters */ + assert_param(IS_NVIC_VECTTAB(NVIC_VectTab)); + assert_param(IS_NVIC_OFFSET(Offset)); + + SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80); +} + +/** + * @brief Selects the condition for the system to enter low power mode. + * @param LowPowerMode: Specifies the new mode for the system to enter low power mode. + * This parameter can be one of the following values: + * @arg NVIC_LP_SEVONPEND + * @arg NVIC_LP_SLEEPDEEP + * @arg NVIC_LP_SLEEPONEXIT + * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_NVIC_LP(LowPowerMode)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + SCB->SCR |= LowPowerMode; + } + else + { + SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode); + } +} + +/** + * @brief Configures the SysTick clock source. + * @param SysTick_CLKSource: specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource)); + if (SysTick_CLKSource == SysTick_CLKSource_HCLK) + { + SysTick->CTRL |= SysTick_CLKSource_HCLK; + } + else + { + SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/3-5 GPIO_光敏传感器/Library/misc.h b/3-5 GPIO_光敏传感器/Library/misc.h new file mode 100644 index 0000000..7d401ca --- /dev/null +++ b/3-5 GPIO_光敏传感器/Library/misc.h @@ -0,0 +1,220 @@ +/** + ****************************************************************************** + * @file misc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the miscellaneous + * firmware library functions (add-on to CMSIS functions). + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MISC_H +#define __MISC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup MISC + * @{ + */ + +/** @defgroup MISC_Exported_Types + * @{ + */ + +/** + * @brief NVIC Init Structure definition + */ + +typedef struct +{ + uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled. + This parameter can be a value of @ref IRQn_Type + (For the complete STM32 Devices IRQ Channels list, please + refer to stm32f10x.h file) */ + + uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel + specified in NVIC_IRQChannel. This parameter can be a value + between 0 and 15 as described in the table @ref NVIC_Priority_Table */ + + uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified + in NVIC_IRQChannel. This parameter can be a value + between 0 and 15 as described in the table @ref NVIC_Priority_Table */ + + FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel + will be enabled or disabled. + This parameter can be set either to ENABLE or DISABLE */ +} NVIC_InitTypeDef; + +/** + * @} + */ + +/** @defgroup NVIC_Priority_Table + * @{ + */ + +/** +@code + The table below gives the allowed values of the pre-emption priority and subpriority according + to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function + ============================================================================================================================ + NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description + ============================================================================================================================ + NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority + | | | 4 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority + | | | 3 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority + | | | 2 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority + | | | 1 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority + | | | 0 bits for subpriority + ============================================================================================================================ +@endcode +*/ + +/** + * @} + */ + +/** @defgroup MISC_Exported_Constants + * @{ + */ + +/** @defgroup Vector_Table_Base + * @{ + */ + +#define NVIC_VectTab_RAM ((uint32_t)0x20000000) +#define NVIC_VectTab_FLASH ((uint32_t)0x08000000) +#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \ + ((VECTTAB) == NVIC_VectTab_FLASH)) +/** + * @} + */ + +/** @defgroup System_Low_Power + * @{ + */ + +#define NVIC_LP_SEVONPEND ((uint8_t)0x10) +#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04) +#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02) +#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \ + ((LP) == NVIC_LP_SLEEPDEEP) || \ + ((LP) == NVIC_LP_SLEEPONEXIT)) +/** + * @} + */ + +/** @defgroup Preemption_Priority_Group + * @{ + */ + +#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority + 4 bits for subpriority */ +#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority + 3 bits for subpriority */ +#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority + 2 bits for subpriority */ +#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority + 1 bits for subpriority */ +#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority + 0 bits for subpriority */ + +#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \ + ((GROUP) == NVIC_PriorityGroup_1) || \ + ((GROUP) == NVIC_PriorityGroup_2) || \ + ((GROUP) == NVIC_PriorityGroup_3) || \ + ((GROUP) == NVIC_PriorityGroup_4)) + +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF) + +/** + * @} + */ + +/** @defgroup SysTick_clock_source + * @{ + */ + +#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB) +#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004) +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \ + ((SOURCE) == SysTick_CLKSource_HCLK_Div8)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup MISC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Exported_Functions + * @{ + */ + +void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup); +void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct); +void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset); +void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState); +void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource); + +#ifdef __cplusplus +} +#endif + +#endif /* __MISC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/3-5 GPIO_光敏传感器/Library/stm32f10x_adc.c b/3-5 GPIO_光敏传感器/Library/stm32f10x_adc.c new file mode 100644 index 0000000..916a096 --- /dev/null +++ b/3-5 GPIO_光敏传感器/Library/stm32f10x_adc.c @@ -0,0 +1,1307 @@ +/** + ****************************************************************************** + * @file stm32f10x_adc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the ADC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_adc.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup ADC + * @brief ADC driver modules + * @{ + */ + +/** @defgroup ADC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Defines + * @{ + */ + +/* ADC DISCNUM mask */ +#define CR1_DISCNUM_Reset ((uint32_t)0xFFFF1FFF) + +/* ADC DISCEN mask */ +#define CR1_DISCEN_Set ((uint32_t)0x00000800) +#define CR1_DISCEN_Reset ((uint32_t)0xFFFFF7FF) + +/* ADC JAUTO mask */ +#define CR1_JAUTO_Set ((uint32_t)0x00000400) +#define CR1_JAUTO_Reset ((uint32_t)0xFFFFFBFF) + +/* ADC JDISCEN mask */ +#define CR1_JDISCEN_Set ((uint32_t)0x00001000) +#define CR1_JDISCEN_Reset ((uint32_t)0xFFFFEFFF) + +/* ADC AWDCH mask */ +#define CR1_AWDCH_Reset ((uint32_t)0xFFFFFFE0) + +/* ADC Analog watchdog enable mode mask */ +#define CR1_AWDMode_Reset ((uint32_t)0xFF3FFDFF) + +/* CR1 register Mask */ +#define CR1_CLEAR_Mask ((uint32_t)0xFFF0FEFF) + +/* ADC ADON mask */ +#define CR2_ADON_Set ((uint32_t)0x00000001) +#define CR2_ADON_Reset ((uint32_t)0xFFFFFFFE) + +/* ADC DMA mask */ +#define CR2_DMA_Set ((uint32_t)0x00000100) +#define CR2_DMA_Reset ((uint32_t)0xFFFFFEFF) + +/* ADC RSTCAL mask */ +#define CR2_RSTCAL_Set ((uint32_t)0x00000008) + +/* ADC CAL mask */ +#define CR2_CAL_Set ((uint32_t)0x00000004) + +/* ADC SWSTART mask */ +#define CR2_SWSTART_Set ((uint32_t)0x00400000) + +/* ADC EXTTRIG mask */ +#define CR2_EXTTRIG_Set ((uint32_t)0x00100000) +#define CR2_EXTTRIG_Reset ((uint32_t)0xFFEFFFFF) + +/* ADC Software start mask */ +#define CR2_EXTTRIG_SWSTART_Set ((uint32_t)0x00500000) +#define CR2_EXTTRIG_SWSTART_Reset ((uint32_t)0xFFAFFFFF) + +/* ADC JEXTSEL mask */ +#define CR2_JEXTSEL_Reset ((uint32_t)0xFFFF8FFF) + +/* ADC JEXTTRIG mask */ +#define CR2_JEXTTRIG_Set ((uint32_t)0x00008000) +#define CR2_JEXTTRIG_Reset ((uint32_t)0xFFFF7FFF) + +/* ADC JSWSTART mask */ +#define CR2_JSWSTART_Set ((uint32_t)0x00200000) + +/* ADC injected software start mask */ +#define CR2_JEXTTRIG_JSWSTART_Set ((uint32_t)0x00208000) +#define CR2_JEXTTRIG_JSWSTART_Reset ((uint32_t)0xFFDF7FFF) + +/* ADC TSPD mask */ +#define CR2_TSVREFE_Set ((uint32_t)0x00800000) +#define CR2_TSVREFE_Reset ((uint32_t)0xFF7FFFFF) + +/* CR2 register Mask */ +#define CR2_CLEAR_Mask ((uint32_t)0xFFF1F7FD) + +/* ADC SQx mask */ +#define SQR3_SQ_Set ((uint32_t)0x0000001F) +#define SQR2_SQ_Set ((uint32_t)0x0000001F) +#define SQR1_SQ_Set ((uint32_t)0x0000001F) + +/* SQR1 register Mask */ +#define SQR1_CLEAR_Mask ((uint32_t)0xFF0FFFFF) + +/* ADC JSQx mask */ +#define JSQR_JSQ_Set ((uint32_t)0x0000001F) + +/* ADC JL mask */ +#define JSQR_JL_Set ((uint32_t)0x00300000) +#define JSQR_JL_Reset ((uint32_t)0xFFCFFFFF) + +/* ADC SMPx mask */ +#define SMPR1_SMP_Set ((uint32_t)0x00000007) +#define SMPR2_SMP_Set ((uint32_t)0x00000007) + +/* ADC JDRx registers offset */ +#define JDR_Offset ((uint8_t)0x28) + +/* ADC1 DR register base address */ +#define DR_ADDRESS ((uint32_t)0x4001244C) + +/** + * @} + */ + +/** @defgroup ADC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the ADCx peripheral registers to their default reset values. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval None + */ +void ADC_DeInit(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + if (ADCx == ADC1) + { + /* Enable ADC1 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE); + /* Release ADC1 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE); + } + else if (ADCx == ADC2) + { + /* Enable ADC2 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, ENABLE); + /* Release ADC2 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, DISABLE); + } + else + { + if (ADCx == ADC3) + { + /* Enable ADC3 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, ENABLE); + /* Release ADC3 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, DISABLE); + } + } +} + +/** + * @brief Initializes the ADCx peripheral according to the specified parameters + * in the ADC_InitStruct. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains + * the configuration information for the specified ADC peripheral. + * @retval None + */ +void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct) +{ + uint32_t tmpreg1 = 0; + uint8_t tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_MODE(ADC_InitStruct->ADC_Mode)); + assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode)); + assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode)); + assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv)); + assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign)); + assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfChannel)); + + /*---------------------------- ADCx CR1 Configuration -----------------*/ + /* Get the ADCx CR1 value */ + tmpreg1 = ADCx->CR1; + /* Clear DUALMOD and SCAN bits */ + tmpreg1 &= CR1_CLEAR_Mask; + /* Configure ADCx: Dual mode and scan conversion mode */ + /* Set DUALMOD bits according to ADC_Mode value */ + /* Set SCAN bit according to ADC_ScanConvMode value */ + tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_Mode | ((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8)); + /* Write to ADCx CR1 */ + ADCx->CR1 = tmpreg1; + + /*---------------------------- ADCx CR2 Configuration -----------------*/ + /* Get the ADCx CR2 value */ + tmpreg1 = ADCx->CR2; + /* Clear CONT, ALIGN and EXTSEL bits */ + tmpreg1 &= CR2_CLEAR_Mask; + /* Configure ADCx: external trigger event and continuous conversion mode */ + /* Set ALIGN bit according to ADC_DataAlign value */ + /* Set EXTSEL bits according to ADC_ExternalTrigConv value */ + /* Set CONT bit according to ADC_ContinuousConvMode value */ + tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv | + ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1)); + /* Write to ADCx CR2 */ + ADCx->CR2 = tmpreg1; + + /*---------------------------- ADCx SQR1 Configuration -----------------*/ + /* Get the ADCx SQR1 value */ + tmpreg1 = ADCx->SQR1; + /* Clear L bits */ + tmpreg1 &= SQR1_CLEAR_Mask; + /* Configure ADCx: regular channel sequence length */ + /* Set L bits according to ADC_NbrOfChannel value */ + tmpreg2 |= (uint8_t) (ADC_InitStruct->ADC_NbrOfChannel - (uint8_t)1); + tmpreg1 |= (uint32_t)tmpreg2 << 20; + /* Write to ADCx SQR1 */ + ADCx->SQR1 = tmpreg1; +} + +/** + * @brief Fills each ADC_InitStruct member with its default value. + * @param ADC_InitStruct : pointer to an ADC_InitTypeDef structure which will be initialized. + * @retval None + */ +void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct) +{ + /* Reset ADC init structure parameters values */ + /* Initialize the ADC_Mode member */ + ADC_InitStruct->ADC_Mode = ADC_Mode_Independent; + /* initialize the ADC_ScanConvMode member */ + ADC_InitStruct->ADC_ScanConvMode = DISABLE; + /* Initialize the ADC_ContinuousConvMode member */ + ADC_InitStruct->ADC_ContinuousConvMode = DISABLE; + /* Initialize the ADC_ExternalTrigConv member */ + ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1; + /* Initialize the ADC_DataAlign member */ + ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right; + /* Initialize the ADC_NbrOfChannel member */ + ADC_InitStruct->ADC_NbrOfChannel = 1; +} + +/** + * @brief Enables or disables the specified ADC peripheral. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the ADCx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the ADON bit to wake up the ADC from power down mode */ + ADCx->CR2 |= CR2_ADON_Set; + } + else + { + /* Disable the selected ADC peripheral */ + ADCx->CR2 &= CR2_ADON_Reset; + } +} + +/** + * @brief Enables or disables the specified ADC DMA request. + * @param ADCx: where x can be 1 or 3 to select the ADC peripheral. + * Note: ADC2 hasn't a DMA capability. + * @param NewState: new state of the selected ADC DMA transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_DMA_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC DMA request */ + ADCx->CR2 |= CR2_DMA_Set; + } + else + { + /* Disable the selected ADC DMA request */ + ADCx->CR2 &= CR2_DMA_Reset; + } +} + +/** + * @brief Enables or disables the specified ADC interrupts. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt mask + * @arg ADC_IT_AWD: Analog watchdog interrupt mask + * @arg ADC_IT_JEOC: End of injected conversion interrupt mask + * @param NewState: new state of the specified ADC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState) +{ + uint8_t itmask = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_ADC_IT(ADC_IT)); + /* Get the ADC IT index */ + itmask = (uint8_t)ADC_IT; + if (NewState != DISABLE) + { + /* Enable the selected ADC interrupts */ + ADCx->CR1 |= itmask; + } + else + { + /* Disable the selected ADC interrupts */ + ADCx->CR1 &= (~(uint32_t)itmask); + } +} + +/** + * @brief Resets the selected ADC calibration registers. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval None + */ +void ADC_ResetCalibration(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Resets the selected ADC calibration registers */ + ADCx->CR2 |= CR2_RSTCAL_Set; +} + +/** + * @brief Gets the selected ADC reset calibration registers status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC reset calibration registers (SET or RESET). + */ +FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of RSTCAL bit */ + if ((ADCx->CR2 & CR2_RSTCAL_Set) != (uint32_t)RESET) + { + /* RSTCAL bit is set */ + bitstatus = SET; + } + else + { + /* RSTCAL bit is reset */ + bitstatus = RESET; + } + /* Return the RSTCAL bit status */ + return bitstatus; +} + +/** + * @brief Starts the selected ADC calibration process. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval None + */ +void ADC_StartCalibration(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Enable the selected ADC calibration process */ + ADCx->CR2 |= CR2_CAL_Set; +} + +/** + * @brief Gets the selected ADC calibration status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC calibration (SET or RESET). + */ +FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of CAL bit */ + if ((ADCx->CR2 & CR2_CAL_Set) != (uint32_t)RESET) + { + /* CAL bit is set: calibration on going */ + bitstatus = SET; + } + else + { + /* CAL bit is reset: end of calibration */ + bitstatus = RESET; + } + /* Return the CAL bit status */ + return bitstatus; +} + +/** + * @brief Enables or disables the selected ADC software start conversion . + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC software start conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC conversion on external event and start the selected + ADC conversion */ + ADCx->CR2 |= CR2_EXTTRIG_SWSTART_Set; + } + else + { + /* Disable the selected ADC conversion on external event and stop the selected + ADC conversion */ + ADCx->CR2 &= CR2_EXTTRIG_SWSTART_Reset; + } +} + +/** + * @brief Gets the selected ADC Software start conversion Status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC software start conversion (SET or RESET). + */ +FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of SWSTART bit */ + if ((ADCx->CR2 & CR2_SWSTART_Set) != (uint32_t)RESET) + { + /* SWSTART bit is set */ + bitstatus = SET; + } + else + { + /* SWSTART bit is reset */ + bitstatus = RESET; + } + /* Return the SWSTART bit status */ + return bitstatus; +} + +/** + * @brief Configures the discontinuous mode for the selected ADC regular + * group channel. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param Number: specifies the discontinuous mode regular channel + * count value. This number must be between 1 and 8. + * @retval None + */ +void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number) +{ + uint32_t tmpreg1 = 0; + uint32_t tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_REGULAR_DISC_NUMBER(Number)); + /* Get the old register value */ + tmpreg1 = ADCx->CR1; + /* Clear the old discontinuous mode channel count */ + tmpreg1 &= CR1_DISCNUM_Reset; + /* Set the discontinuous mode channel count */ + tmpreg2 = Number - 1; + tmpreg1 |= tmpreg2 << 13; + /* Store the new register value */ + ADCx->CR1 = tmpreg1; +} + +/** + * @brief Enables or disables the discontinuous mode on regular group + * channel for the specified ADC + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC discontinuous mode + * on regular group channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC regular discontinuous mode */ + ADCx->CR1 |= CR1_DISCEN_Set; + } + else + { + /* Disable the selected ADC regular discontinuous mode */ + ADCx->CR1 &= CR1_DISCEN_Reset; + } +} + +/** + * @brief Configures for the selected ADC regular channel its corresponding + * rank in the sequencer and its sample time. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @param Rank: The rank in the regular group sequencer. This parameter must be between 1 to 16. + * @param ADC_SampleTime: The sample time value to be set for the selected channel. + * This parameter can be one of the following values: + * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles + * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles + * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles + * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles + * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles + * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles + * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles + * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles + * @retval None + */ +void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + assert_param(IS_ADC_REGULAR_RANK(Rank)); + assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); + /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ + if (ADC_Channel > ADC_Channel_9) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR1; + /* Calculate the mask to clear */ + tmpreg2 = SMPR1_SMP_Set << (3 * (ADC_Channel - 10)); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10)); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR1 = tmpreg1; + } + else /* ADC_Channel include in ADC_Channel_[0..9] */ + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR2; + /* Calculate the mask to clear */ + tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR2 = tmpreg1; + } + /* For Rank 1 to 6 */ + if (Rank < 7) + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR3; + /* Calculate the mask to clear */ + tmpreg2 = SQR3_SQ_Set << (5 * (Rank - 1)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 1)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR3 = tmpreg1; + } + /* For Rank 7 to 12 */ + else if (Rank < 13) + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR2; + /* Calculate the mask to clear */ + tmpreg2 = SQR2_SQ_Set << (5 * (Rank - 7)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 7)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR2 = tmpreg1; + } + /* For Rank 13 to 16 */ + else + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR1; + /* Calculate the mask to clear */ + tmpreg2 = SQR1_SQ_Set << (5 * (Rank - 13)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 13)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR1 = tmpreg1; + } +} + +/** + * @brief Enables or disables the ADCx conversion through external trigger. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC external trigger start of conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC conversion on external event */ + ADCx->CR2 |= CR2_EXTTRIG_Set; + } + else + { + /* Disable the selected ADC conversion on external event */ + ADCx->CR2 &= CR2_EXTTRIG_Reset; + } +} + +/** + * @brief Returns the last ADCx conversion result data for regular channel. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The Data conversion value. + */ +uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Return the selected ADC conversion value */ + return (uint16_t) ADCx->DR; +} + +/** + * @brief Returns the last ADC1 and ADC2 conversion result data in dual mode. + * @retval The Data conversion value. + */ +uint32_t ADC_GetDualModeConversionValue(void) +{ + /* Return the dual mode conversion value */ + return (*(__IO uint32_t *) DR_ADDRESS); +} + +/** + * @brief Enables or disables the selected ADC automatic injected group + * conversion after regular one. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC auto injected conversion + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC automatic injected group conversion */ + ADCx->CR1 |= CR1_JAUTO_Set; + } + else + { + /* Disable the selected ADC automatic injected group conversion */ + ADCx->CR1 &= CR1_JAUTO_Reset; + } +} + +/** + * @brief Enables or disables the discontinuous mode for injected group + * channel for the specified ADC + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC discontinuous mode + * on injected group channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC injected discontinuous mode */ + ADCx->CR1 |= CR1_JDISCEN_Set; + } + else + { + /* Disable the selected ADC injected discontinuous mode */ + ADCx->CR1 &= CR1_JDISCEN_Reset; + } +} + +/** + * @brief Configures the ADCx external trigger for injected channels conversion. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_ExternalTrigInjecConv: specifies the ADC trigger to start injected conversion. + * This parameter can be one of the following values: + * @arg ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected (for ADC1, ADC2 and ADC3) + * @arg ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected (for ADC1, ADC2 and ADC3) + * @arg ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: External interrupt line 15 or Timer8 + * capture compare4 event selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_None: Injected conversion started by software and not + * by external trigger (for ADC1, ADC2 and ADC3) + * @retval None + */ +void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv)); + /* Get the old register value */ + tmpreg = ADCx->CR2; + /* Clear the old external event selection for injected group */ + tmpreg &= CR2_JEXTSEL_Reset; + /* Set the external event selection for injected group */ + tmpreg |= ADC_ExternalTrigInjecConv; + /* Store the new register value */ + ADCx->CR2 = tmpreg; +} + +/** + * @brief Enables or disables the ADCx injected channels conversion through + * external trigger + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC external trigger start of + * injected conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC external event selection for injected group */ + ADCx->CR2 |= CR2_JEXTTRIG_Set; + } + else + { + /* Disable the selected ADC external event selection for injected group */ + ADCx->CR2 &= CR2_JEXTTRIG_Reset; + } +} + +/** + * @brief Enables or disables the selected ADC start of the injected + * channels conversion. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC software start injected conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC conversion for injected group on external event and start the selected + ADC injected conversion */ + ADCx->CR2 |= CR2_JEXTTRIG_JSWSTART_Set; + } + else + { + /* Disable the selected ADC conversion on external event for injected group and stop the selected + ADC injected conversion */ + ADCx->CR2 &= CR2_JEXTTRIG_JSWSTART_Reset; + } +} + +/** + * @brief Gets the selected ADC Software start injected conversion Status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC software start injected conversion (SET or RESET). + */ +FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of JSWSTART bit */ + if ((ADCx->CR2 & CR2_JSWSTART_Set) != (uint32_t)RESET) + { + /* JSWSTART bit is set */ + bitstatus = SET; + } + else + { + /* JSWSTART bit is reset */ + bitstatus = RESET; + } + /* Return the JSWSTART bit status */ + return bitstatus; +} + +/** + * @brief Configures for the selected ADC injected channel its corresponding + * rank in the sequencer and its sample time. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @param Rank: The rank in the injected group sequencer. This parameter must be between 1 and 4. + * @param ADC_SampleTime: The sample time value to be set for the selected channel. + * This parameter can be one of the following values: + * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles + * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles + * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles + * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles + * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles + * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles + * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles + * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles + * @retval None + */ +void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + assert_param(IS_ADC_INJECTED_RANK(Rank)); + assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); + /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ + if (ADC_Channel > ADC_Channel_9) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR1; + /* Calculate the mask to clear */ + tmpreg2 = SMPR1_SMP_Set << (3*(ADC_Channel - 10)); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3*(ADC_Channel - 10)); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR1 = tmpreg1; + } + else /* ADC_Channel include in ADC_Channel_[0..9] */ + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR2; + /* Calculate the mask to clear */ + tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR2 = tmpreg1; + } + /* Rank configuration */ + /* Get the old register value */ + tmpreg1 = ADCx->JSQR; + /* Get JL value: Number = JL+1 */ + tmpreg3 = (tmpreg1 & JSQR_JL_Set)>> 20; + /* Calculate the mask to clear: ((Rank-1)+(4-JL-1)) */ + tmpreg2 = JSQR_JSQ_Set << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); + /* Clear the old JSQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set: ((Rank-1)+(4-JL-1)) */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); + /* Set the JSQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->JSQR = tmpreg1; +} + +/** + * @brief Configures the sequencer length for injected channels + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param Length: The sequencer length. + * This parameter must be a number between 1 to 4. + * @retval None + */ +void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length) +{ + uint32_t tmpreg1 = 0; + uint32_t tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_LENGTH(Length)); + + /* Get the old register value */ + tmpreg1 = ADCx->JSQR; + /* Clear the old injected sequnence lenght JL bits */ + tmpreg1 &= JSQR_JL_Reset; + /* Set the injected sequnence lenght JL bits */ + tmpreg2 = Length - 1; + tmpreg1 |= tmpreg2 << 20; + /* Store the new register value */ + ADCx->JSQR = tmpreg1; +} + +/** + * @brief Set the injected channels conversion value offset + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_InjectedChannel: the ADC injected channel to set its offset. + * This parameter can be one of the following values: + * @arg ADC_InjectedChannel_1: Injected Channel1 selected + * @arg ADC_InjectedChannel_2: Injected Channel2 selected + * @arg ADC_InjectedChannel_3: Injected Channel3 selected + * @arg ADC_InjectedChannel_4: Injected Channel4 selected + * @param Offset: the offset value for the selected ADC injected channel + * This parameter must be a 12bit value. + * @retval None + */ +void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); + assert_param(IS_ADC_OFFSET(Offset)); + + tmp = (uint32_t)ADCx; + tmp += ADC_InjectedChannel; + + /* Set the selected injected channel data offset */ + *(__IO uint32_t *) tmp = (uint32_t)Offset; +} + +/** + * @brief Returns the ADC injected channel conversion result + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_InjectedChannel: the converted ADC injected channel. + * This parameter can be one of the following values: + * @arg ADC_InjectedChannel_1: Injected Channel1 selected + * @arg ADC_InjectedChannel_2: Injected Channel2 selected + * @arg ADC_InjectedChannel_3: Injected Channel3 selected + * @arg ADC_InjectedChannel_4: Injected Channel4 selected + * @retval The Data conversion value. + */ +uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); + + tmp = (uint32_t)ADCx; + tmp += ADC_InjectedChannel + JDR_Offset; + + /* Returns the selected injected channel conversion data value */ + return (uint16_t) (*(__IO uint32_t*) tmp); +} + +/** + * @brief Enables or disables the analog watchdog on single/all regular + * or injected channels + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_AnalogWatchdog: the ADC analog watchdog configuration. + * This parameter can be one of the following values: + * @arg ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel + * @arg ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel + * @arg ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel + * @arg ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular channel + * @arg ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected channel + * @arg ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels + * @arg ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog + * @retval None + */ +void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog)); + /* Get the old register value */ + tmpreg = ADCx->CR1; + /* Clear AWDEN, AWDENJ and AWDSGL bits */ + tmpreg &= CR1_AWDMode_Reset; + /* Set the analog watchdog enable mode */ + tmpreg |= ADC_AnalogWatchdog; + /* Store the new register value */ + ADCx->CR1 = tmpreg; +} + +/** + * @brief Configures the high and low thresholds of the analog watchdog. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param HighThreshold: the ADC analog watchdog High threshold value. + * This parameter must be a 12bit value. + * @param LowThreshold: the ADC analog watchdog Low threshold value. + * This parameter must be a 12bit value. + * @retval None + */ +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, + uint16_t LowThreshold) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_THRESHOLD(HighThreshold)); + assert_param(IS_ADC_THRESHOLD(LowThreshold)); + /* Set the ADCx high threshold */ + ADCx->HTR = HighThreshold; + /* Set the ADCx low threshold */ + ADCx->LTR = LowThreshold; +} + +/** + * @brief Configures the analog watchdog guarded single channel + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure for the analog watchdog. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @retval None + */ +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + /* Get the old register value */ + tmpreg = ADCx->CR1; + /* Clear the Analog watchdog channel select bits */ + tmpreg &= CR1_AWDCH_Reset; + /* Set the Analog watchdog channel */ + tmpreg |= ADC_Channel; + /* Store the new register value */ + ADCx->CR1 = tmpreg; +} + +/** + * @brief Enables or disables the temperature sensor and Vrefint channel. + * @param NewState: new state of the temperature sensor. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_TempSensorVrefintCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the temperature sensor and Vrefint channel*/ + ADC1->CR2 |= CR2_TSVREFE_Set; + } + else + { + /* Disable the temperature sensor and Vrefint channel*/ + ADC1->CR2 &= CR2_TSVREFE_Reset; + } +} + +/** + * @brief Checks whether the specified ADC flag is set or not. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg ADC_FLAG_AWD: Analog watchdog flag + * @arg ADC_FLAG_EOC: End of conversion flag + * @arg ADC_FLAG_JEOC: End of injected group conversion flag + * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag + * @arg ADC_FLAG_STRT: Start of regular group conversion flag + * @retval The new state of ADC_FLAG (SET or RESET). + */ +FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_GET_FLAG(ADC_FLAG)); + /* Check the status of the specified ADC flag */ + if ((ADCx->SR & ADC_FLAG) != (uint8_t)RESET) + { + /* ADC_FLAG is set */ + bitstatus = SET; + } + else + { + /* ADC_FLAG is reset */ + bitstatus = RESET; + } + /* Return the ADC_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the ADCx's pending flags. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg ADC_FLAG_AWD: Analog watchdog flag + * @arg ADC_FLAG_EOC: End of conversion flag + * @arg ADC_FLAG_JEOC: End of injected group conversion flag + * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag + * @arg ADC_FLAG_STRT: Start of regular group conversion flag + * @retval None + */ +void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG)); + /* Clear the selected ADC flags */ + ADCx->SR = ~(uint32_t)ADC_FLAG; +} + +/** + * @brief Checks whether the specified ADC interrupt has occurred or not. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt source to check. + * This parameter can be one of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt mask + * @arg ADC_IT_AWD: Analog watchdog interrupt mask + * @arg ADC_IT_JEOC: End of injected conversion interrupt mask + * @retval The new state of ADC_IT (SET or RESET). + */ +ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t itmask = 0, enablestatus = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_GET_IT(ADC_IT)); + /* Get the ADC IT index */ + itmask = ADC_IT >> 8; + /* Get the ADC_IT enable bit status */ + enablestatus = (ADCx->CR1 & (uint8_t)ADC_IT) ; + /* Check the status of the specified ADC interrupt */ + if (((ADCx->SR & itmask) != (uint32_t)RESET) && enablestatus) + { + /* ADC_IT is set */ + bitstatus = SET; + } + else + { + /* ADC_IT is reset */ + bitstatus = RESET; + } + /* Return the ADC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the ADCx's interrupt pending bits. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt mask + * @arg ADC_IT_AWD: Analog watchdog interrupt mask + * @arg ADC_IT_JEOC: End of injected conversion interrupt mask + * @retval None + */ +void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT) +{ + uint8_t itmask = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_IT(ADC_IT)); + /* Get the ADC IT index */ + itmask = (uint8_t)(ADC_IT >> 8); + /* Clear the selected ADC interrupt pending bits */ + ADCx->SR = ~(uint32_t)itmask; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/3-5 GPIO_光敏传感器/Library/stm32f10x_adc.h b/3-5 GPIO_光敏传感器/Library/stm32f10x_adc.h new file mode 100644 index 0000000..d1b2653 --- /dev/null +++ b/3-5 GPIO_光敏传感器/Library/stm32f10x_adc.h @@ -0,0 +1,483 @@ +/** + ****************************************************************************** + * @file stm32f10x_adc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the ADC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_ADC_H +#define __STM32F10x_ADC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/** @defgroup ADC_Exported_Types + * @{ + */ + +/** + * @brief ADC Init structure definition + */ + +typedef struct +{ + uint32_t ADC_Mode; /*!< Configures the ADC to operate in independent or + dual mode. + This parameter can be a value of @ref ADC_mode */ + + FunctionalState ADC_ScanConvMode; /*!< Specifies whether the conversion is performed in + Scan (multichannels) or Single (one channel) mode. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState ADC_ContinuousConvMode; /*!< Specifies whether the conversion is performed in + Continuous or Single mode. + This parameter can be set to ENABLE or DISABLE. */ + + uint32_t ADC_ExternalTrigConv; /*!< Defines the external trigger used to start the analog + to digital conversion of regular channels. This parameter + can be a value of @ref ADC_external_trigger_sources_for_regular_channels_conversion */ + + uint32_t ADC_DataAlign; /*!< Specifies whether the ADC data alignment is left or right. + This parameter can be a value of @ref ADC_data_align */ + + uint8_t ADC_NbrOfChannel; /*!< Specifies the number of ADC channels that will be converted + using the sequencer for regular channel group. + This parameter must range from 1 to 16. */ +}ADC_InitTypeDef; +/** + * @} + */ + +/** @defgroup ADC_Exported_Constants + * @{ + */ + +#define IS_ADC_ALL_PERIPH(PERIPH) (((PERIPH) == ADC1) || \ + ((PERIPH) == ADC2) || \ + ((PERIPH) == ADC3)) + +#define IS_ADC_DMA_PERIPH(PERIPH) (((PERIPH) == ADC1) || \ + ((PERIPH) == ADC3)) + +/** @defgroup ADC_mode + * @{ + */ + +#define ADC_Mode_Independent ((uint32_t)0x00000000) +#define ADC_Mode_RegInjecSimult ((uint32_t)0x00010000) +#define ADC_Mode_RegSimult_AlterTrig ((uint32_t)0x00020000) +#define ADC_Mode_InjecSimult_FastInterl ((uint32_t)0x00030000) +#define ADC_Mode_InjecSimult_SlowInterl ((uint32_t)0x00040000) +#define ADC_Mode_InjecSimult ((uint32_t)0x00050000) +#define ADC_Mode_RegSimult ((uint32_t)0x00060000) +#define ADC_Mode_FastInterl ((uint32_t)0x00070000) +#define ADC_Mode_SlowInterl ((uint32_t)0x00080000) +#define ADC_Mode_AlterTrig ((uint32_t)0x00090000) + +#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \ + ((MODE) == ADC_Mode_RegInjecSimult) || \ + ((MODE) == ADC_Mode_RegSimult_AlterTrig) || \ + ((MODE) == ADC_Mode_InjecSimult_FastInterl) || \ + ((MODE) == ADC_Mode_InjecSimult_SlowInterl) || \ + ((MODE) == ADC_Mode_InjecSimult) || \ + ((MODE) == ADC_Mode_RegSimult) || \ + ((MODE) == ADC_Mode_FastInterl) || \ + ((MODE) == ADC_Mode_SlowInterl) || \ + ((MODE) == ADC_Mode_AlterTrig)) +/** + * @} + */ + +/** @defgroup ADC_external_trigger_sources_for_regular_channels_conversion + * @{ + */ + +#define ADC_ExternalTrigConv_T1_CC1 ((uint32_t)0x00000000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T1_CC2 ((uint32_t)0x00020000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T2_CC2 ((uint32_t)0x00060000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T3_TRGO ((uint32_t)0x00080000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T4_CC4 ((uint32_t)0x000A0000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO ((uint32_t)0x000C0000) /*!< For ADC1 and ADC2 */ + +#define ADC_ExternalTrigConv_T1_CC3 ((uint32_t)0x00040000) /*!< For ADC1, ADC2 and ADC3 */ +#define ADC_ExternalTrigConv_None ((uint32_t)0x000E0000) /*!< For ADC1, ADC2 and ADC3 */ + +#define ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x00000000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T2_CC3 ((uint32_t)0x00020000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T8_CC1 ((uint32_t)0x00060000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T8_TRGO ((uint32_t)0x00080000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T5_CC1 ((uint32_t)0x000A0000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T5_CC3 ((uint32_t)0x000C0000) /*!< For ADC3 only */ + +#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \ + ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_None) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T5_CC3)) +/** + * @} + */ + +/** @defgroup ADC_data_align + * @{ + */ + +#define ADC_DataAlign_Right ((uint32_t)0x00000000) +#define ADC_DataAlign_Left ((uint32_t)0x00000800) +#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \ + ((ALIGN) == ADC_DataAlign_Left)) +/** + * @} + */ + +/** @defgroup ADC_channels + * @{ + */ + +#define ADC_Channel_0 ((uint8_t)0x00) +#define ADC_Channel_1 ((uint8_t)0x01) +#define ADC_Channel_2 ((uint8_t)0x02) +#define ADC_Channel_3 ((uint8_t)0x03) +#define ADC_Channel_4 ((uint8_t)0x04) +#define ADC_Channel_5 ((uint8_t)0x05) +#define ADC_Channel_6 ((uint8_t)0x06) +#define ADC_Channel_7 ((uint8_t)0x07) +#define ADC_Channel_8 ((uint8_t)0x08) +#define ADC_Channel_9 ((uint8_t)0x09) +#define ADC_Channel_10 ((uint8_t)0x0A) +#define ADC_Channel_11 ((uint8_t)0x0B) +#define ADC_Channel_12 ((uint8_t)0x0C) +#define ADC_Channel_13 ((uint8_t)0x0D) +#define ADC_Channel_14 ((uint8_t)0x0E) +#define ADC_Channel_15 ((uint8_t)0x0F) +#define ADC_Channel_16 ((uint8_t)0x10) +#define ADC_Channel_17 ((uint8_t)0x11) + +#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_16) +#define ADC_Channel_Vrefint ((uint8_t)ADC_Channel_17) + +#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || ((CHANNEL) == ADC_Channel_1) || \ + ((CHANNEL) == ADC_Channel_2) || ((CHANNEL) == ADC_Channel_3) || \ + ((CHANNEL) == ADC_Channel_4) || ((CHANNEL) == ADC_Channel_5) || \ + ((CHANNEL) == ADC_Channel_6) || ((CHANNEL) == ADC_Channel_7) || \ + ((CHANNEL) == ADC_Channel_8) || ((CHANNEL) == ADC_Channel_9) || \ + ((CHANNEL) == ADC_Channel_10) || ((CHANNEL) == ADC_Channel_11) || \ + ((CHANNEL) == ADC_Channel_12) || ((CHANNEL) == ADC_Channel_13) || \ + ((CHANNEL) == ADC_Channel_14) || ((CHANNEL) == ADC_Channel_15) || \ + ((CHANNEL) == ADC_Channel_16) || ((CHANNEL) == ADC_Channel_17)) +/** + * @} + */ + +/** @defgroup ADC_sampling_time + * @{ + */ + +#define ADC_SampleTime_1Cycles5 ((uint8_t)0x00) +#define ADC_SampleTime_7Cycles5 ((uint8_t)0x01) +#define ADC_SampleTime_13Cycles5 ((uint8_t)0x02) +#define ADC_SampleTime_28Cycles5 ((uint8_t)0x03) +#define ADC_SampleTime_41Cycles5 ((uint8_t)0x04) +#define ADC_SampleTime_55Cycles5 ((uint8_t)0x05) +#define ADC_SampleTime_71Cycles5 ((uint8_t)0x06) +#define ADC_SampleTime_239Cycles5 ((uint8_t)0x07) +#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_1Cycles5) || \ + ((TIME) == ADC_SampleTime_7Cycles5) || \ + ((TIME) == ADC_SampleTime_13Cycles5) || \ + ((TIME) == ADC_SampleTime_28Cycles5) || \ + ((TIME) == ADC_SampleTime_41Cycles5) || \ + ((TIME) == ADC_SampleTime_55Cycles5) || \ + ((TIME) == ADC_SampleTime_71Cycles5) || \ + ((TIME) == ADC_SampleTime_239Cycles5)) +/** + * @} + */ + +/** @defgroup ADC_external_trigger_sources_for_injected_channels_conversion + * @{ + */ + +#define ADC_ExternalTrigInjecConv_T2_TRGO ((uint32_t)0x00002000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_T2_CC1 ((uint32_t)0x00003000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_T3_CC4 ((uint32_t)0x00004000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_T4_TRGO ((uint32_t)0x00005000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 ((uint32_t)0x00006000) /*!< For ADC1 and ADC2 */ + +#define ADC_ExternalTrigInjecConv_T1_TRGO ((uint32_t)0x00000000) /*!< For ADC1, ADC2 and ADC3 */ +#define ADC_ExternalTrigInjecConv_T1_CC4 ((uint32_t)0x00001000) /*!< For ADC1, ADC2 and ADC3 */ +#define ADC_ExternalTrigInjecConv_None ((uint32_t)0x00007000) /*!< For ADC1, ADC2 and ADC3 */ + +#define ADC_ExternalTrigInjecConv_T4_CC3 ((uint32_t)0x00002000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T8_CC2 ((uint32_t)0x00003000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T8_CC4 ((uint32_t)0x00004000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T5_TRGO ((uint32_t)0x00005000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T5_CC4 ((uint32_t)0x00006000) /*!< For ADC3 only */ + +#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_None) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4)) +/** + * @} + */ + +/** @defgroup ADC_injected_channel_selection + * @{ + */ + +#define ADC_InjectedChannel_1 ((uint8_t)0x14) +#define ADC_InjectedChannel_2 ((uint8_t)0x18) +#define ADC_InjectedChannel_3 ((uint8_t)0x1C) +#define ADC_InjectedChannel_4 ((uint8_t)0x20) +#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \ + ((CHANNEL) == ADC_InjectedChannel_2) || \ + ((CHANNEL) == ADC_InjectedChannel_3) || \ + ((CHANNEL) == ADC_InjectedChannel_4)) +/** + * @} + */ + +/** @defgroup ADC_analog_watchdog_selection + * @{ + */ + +#define ADC_AnalogWatchdog_SingleRegEnable ((uint32_t)0x00800200) +#define ADC_AnalogWatchdog_SingleInjecEnable ((uint32_t)0x00400200) +#define ADC_AnalogWatchdog_SingleRegOrInjecEnable ((uint32_t)0x00C00200) +#define ADC_AnalogWatchdog_AllRegEnable ((uint32_t)0x00800000) +#define ADC_AnalogWatchdog_AllInjecEnable ((uint32_t)0x00400000) +#define ADC_AnalogWatchdog_AllRegAllInjecEnable ((uint32_t)0x00C00000) +#define ADC_AnalogWatchdog_None ((uint32_t)0x00000000) + +#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_None)) +/** + * @} + */ + +/** @defgroup ADC_interrupts_definition + * @{ + */ + +#define ADC_IT_EOC ((uint16_t)0x0220) +#define ADC_IT_AWD ((uint16_t)0x0140) +#define ADC_IT_JEOC ((uint16_t)0x0480) + +#define IS_ADC_IT(IT) ((((IT) & (uint16_t)0xF81F) == 0x00) && ((IT) != 0x00)) + +#define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \ + ((IT) == ADC_IT_JEOC)) +/** + * @} + */ + +/** @defgroup ADC_flags_definition + * @{ + */ + +#define ADC_FLAG_AWD ((uint8_t)0x01) +#define ADC_FLAG_EOC ((uint8_t)0x02) +#define ADC_FLAG_JEOC ((uint8_t)0x04) +#define ADC_FLAG_JSTRT ((uint8_t)0x08) +#define ADC_FLAG_STRT ((uint8_t)0x10) +#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xE0) == 0x00) && ((FLAG) != 0x00)) +#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC) || \ + ((FLAG) == ADC_FLAG_JEOC) || ((FLAG)== ADC_FLAG_JSTRT) || \ + ((FLAG) == ADC_FLAG_STRT)) +/** + * @} + */ + +/** @defgroup ADC_thresholds + * @{ + */ + +#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF) + +/** + * @} + */ + +/** @defgroup ADC_injected_offset + * @{ + */ + +#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF) + +/** + * @} + */ + +/** @defgroup ADC_injected_length + * @{ + */ + +#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4)) + +/** + * @} + */ + +/** @defgroup ADC_injected_rank + * @{ + */ + +#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4)) + +/** + * @} + */ + + +/** @defgroup ADC_regular_length + * @{ + */ + +#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10)) +/** + * @} + */ + +/** @defgroup ADC_regular_rank + * @{ + */ + +#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10)) + +/** + * @} + */ + +/** @defgroup ADC_regular_discontinuous_mode_number + * @{ + */ + +#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup ADC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions + * @{ + */ + +void ADC_DeInit(ADC_TypeDef* ADCx); +void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct); +void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct); +void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState); +void ADC_ResetCalibration(ADC_TypeDef* ADCx); +FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx); +void ADC_StartCalibration(ADC_TypeDef* ADCx); +FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx); +void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx); +void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number); +void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); +void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx); +uint32_t ADC_GetDualModeConversionValue(void); +void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv); +void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx); +void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); +void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length); +void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset); +uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel); +void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog); +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, uint16_t LowThreshold); +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel); +void ADC_TempSensorVrefintCmd(FunctionalState NewState); +FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG); +void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG); +ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT); +void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_ADC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/3-5 GPIO_光敏传感器/Library/stm32f10x_bkp.c b/3-5 GPIO_光敏传感器/Library/stm32f10x_bkp.c new file mode 100644 index 0000000..3004b9e --- /dev/null +++ b/3-5 GPIO_光敏传感器/Library/stm32f10x_bkp.c @@ -0,0 +1,308 @@ +/** + ****************************************************************************** + * @file stm32f10x_bkp.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the BKP firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_bkp.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup BKP + * @brief BKP driver modules + * @{ + */ + +/** @defgroup BKP_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_Defines + * @{ + */ + +/* ------------ BKP registers bit address in the alias region --------------- */ +#define BKP_OFFSET (BKP_BASE - PERIPH_BASE) + +/* --- CR Register ----*/ + +/* Alias word address of TPAL bit */ +#define CR_OFFSET (BKP_OFFSET + 0x30) +#define TPAL_BitNumber 0x01 +#define CR_TPAL_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4)) + +/* Alias word address of TPE bit */ +#define TPE_BitNumber 0x00 +#define CR_TPE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4)) + +/* --- CSR Register ---*/ + +/* Alias word address of TPIE bit */ +#define CSR_OFFSET (BKP_OFFSET + 0x34) +#define TPIE_BitNumber 0x02 +#define CSR_TPIE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4)) + +/* Alias word address of TIF bit */ +#define TIF_BitNumber 0x09 +#define CSR_TIF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4)) + +/* Alias word address of TEF bit */ +#define TEF_BitNumber 0x08 +#define CSR_TEF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4)) + +/* ---------------------- BKP registers bit mask ------------------------ */ + +/* RTCCR register bit mask */ +#define RTCCR_CAL_MASK ((uint16_t)0xFF80) +#define RTCCR_MASK ((uint16_t)0xFC7F) + +/** + * @} + */ + + +/** @defgroup BKP_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the BKP peripheral registers to their default reset values. + * @param None + * @retval None + */ +void BKP_DeInit(void) +{ + RCC_BackupResetCmd(ENABLE); + RCC_BackupResetCmd(DISABLE); +} + +/** + * @brief Configures the Tamper Pin active level. + * @param BKP_TamperPinLevel: specifies the Tamper Pin active level. + * This parameter can be one of the following values: + * @arg BKP_TamperPinLevel_High: Tamper pin active on high level + * @arg BKP_TamperPinLevel_Low: Tamper pin active on low level + * @retval None + */ +void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel) +{ + /* Check the parameters */ + assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel)); + *(__IO uint32_t *) CR_TPAL_BB = BKP_TamperPinLevel; +} + +/** + * @brief Enables or disables the Tamper Pin activation. + * @param NewState: new state of the Tamper Pin activation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void BKP_TamperPinCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_TPE_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the Tamper Pin Interrupt. + * @param NewState: new state of the Tamper Pin Interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void BKP_ITConfig(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CSR_TPIE_BB = (uint32_t)NewState; +} + +/** + * @brief Select the RTC output source to output on the Tamper pin. + * @param BKP_RTCOutputSource: specifies the RTC output source. + * This parameter can be one of the following values: + * @arg BKP_RTCOutputSource_None: no RTC output on the Tamper pin. + * @arg BKP_RTCOutputSource_CalibClock: output the RTC clock with frequency + * divided by 64 on the Tamper pin. + * @arg BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse signal on + * the Tamper pin. + * @arg BKP_RTCOutputSource_Second: output the RTC Second pulse signal on + * the Tamper pin. + * @retval None + */ +void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource) +{ + uint16_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource)); + tmpreg = BKP->RTCCR; + /* Clear CCO, ASOE and ASOS bits */ + tmpreg &= RTCCR_MASK; + + /* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */ + tmpreg |= BKP_RTCOutputSource; + /* Store the new value */ + BKP->RTCCR = tmpreg; +} + +/** + * @brief Sets RTC Clock Calibration value. + * @param CalibrationValue: specifies the RTC Clock Calibration value. + * This parameter must be a number between 0 and 0x7F. + * @retval None + */ +void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue) +{ + uint16_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue)); + tmpreg = BKP->RTCCR; + /* Clear CAL[6:0] bits */ + tmpreg &= RTCCR_CAL_MASK; + /* Set CAL[6:0] bits according to CalibrationValue value */ + tmpreg |= CalibrationValue; + /* Store the new value */ + BKP->RTCCR = tmpreg; +} + +/** + * @brief Writes user data to the specified Data Backup Register. + * @param BKP_DR: specifies the Data Backup Register. + * This parameter can be BKP_DRx where x:[1, 42] + * @param Data: data to write + * @retval None + */ +void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_BKP_DR(BKP_DR)); + + tmp = (uint32_t)BKP_BASE; + tmp += BKP_DR; + + *(__IO uint32_t *) tmp = Data; +} + +/** + * @brief Reads data from the specified Data Backup Register. + * @param BKP_DR: specifies the Data Backup Register. + * This parameter can be BKP_DRx where x:[1, 42] + * @retval The content of the specified Data Backup Register + */ +uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_BKP_DR(BKP_DR)); + + tmp = (uint32_t)BKP_BASE; + tmp += BKP_DR; + + return (*(__IO uint16_t *) tmp); +} + +/** + * @brief Checks whether the Tamper Pin Event flag is set or not. + * @param None + * @retval The new state of the Tamper Pin Event flag (SET or RESET). + */ +FlagStatus BKP_GetFlagStatus(void) +{ + return (FlagStatus)(*(__IO uint32_t *) CSR_TEF_BB); +} + +/** + * @brief Clears Tamper Pin Event pending flag. + * @param None + * @retval None + */ +void BKP_ClearFlag(void) +{ + /* Set CTE bit to clear Tamper Pin Event flag */ + BKP->CSR |= BKP_CSR_CTE; +} + +/** + * @brief Checks whether the Tamper Pin Interrupt has occurred or not. + * @param None + * @retval The new state of the Tamper Pin Interrupt (SET or RESET). + */ +ITStatus BKP_GetITStatus(void) +{ + return (ITStatus)(*(__IO uint32_t *) CSR_TIF_BB); +} + +/** + * @brief Clears Tamper Pin Interrupt pending bit. + * @param None + * @retval None + */ +void BKP_ClearITPendingBit(void) +{ + /* Set CTI bit to clear Tamper Pin Interrupt pending bit */ + BKP->CSR |= BKP_CSR_CTI; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/